670434
69
Zoom out
Zoom in
Previous page
1/96
Next page
11-2
Tone Control Function
MENU
» SET > Tone Control > FM
HPF/LPF (Default: – – – – – – – – –)
Sets the receive audio high-pass lter and low-pass
lter cutoff frequencies in 100 Hz steps.
Selectable ranges:
HPF: 100 ~ 2000 Hz
LPF: 500 ~ 2400 Hz
Bass (Default: 0)
Treble (Default: 0)
Sets the bass or treble level of the receive audio.
Range: –15 ~ +15
De-Emphasis(50k) (Default: OFF)
De-Emphasis(15k) (Default: ON)
De-Emphasis(7k) (Default: ON)
Turns the de-emphasis circuit ON or OFF for each
bandwidth of lter (50k/15k/7k).
OFF: The de-emphasis circuit is turned OFF.
• ON: The de-emphasis circuit is turned ON for the
selected band width.
MENU
» SET > Tone Control > WFM
Bass (Default: 0)
Treble (Default: 0)
Sets the bass or treble level of the receive audio.
Range: –15 ~ +15
MENU
» SET > Tone Control > AM/SSB/CW/FSK/
D-STAR/P25/dPMR/NXDN/DCR
HPF/LPF (Default: – – – – – – – – –)
Sets the receive audio high-pass lter and low-pass
lter cutoff frequencies in 100 Hz steps.
Selectable ranges:
HPF: 100 ~ 2000 Hz
LPF: 500 ~ 2400 Hz
Bass (Default: 0)
Treble (Default: 0)
Sets the bass or treble level of the receive audio.
Range: –15 ~ +15
MENU
» SET > FUNCTION
Beep Level (Default: 50%)
Sets the beep output level.
Range: 0 ~ 100%
L If the “Beep (Conrmation)” item is set to “OFF,” no beep sounds.
Beep Level Limit (Default: ON)
Selects whether or not to limit the volume up to the
specied level.
OFF: Does not limit the volume level.
• ON: Limits the volume level.
Further rotation of
does not increase
the level.
Beep (Conrmation) (Default: ON)
Turns the Conrmation beep ON or OFF.
OFF: Does not sound a beep.
ON: Sounds the beep when a key is pushed.
L If the “Beep Level” item is set to “0%,” no beep sounds.
SPEECH >
SPEECH Language (Default: English)
Selects the speech language.
• English: Speech in English.
• Japanese: Speech in Japanese.
SPEECH > SPEECH Speed (Default: Fast)
Selects the speech speed.
Slow: Speech speed is slow.
Fast: Speech speed is fast.
SPEECH > S-Level SPEECH (Default: ON)
Turns the S-meter level announcement ON or OFF.
OFF: When you push
, the frequency and
receive mode is announced.
ON: When you push ,
the S-meter level,
frequency and
receive mode
are announced.
SPEECH > MODE SPEECH (Default: OFF)
Turns the receive mode announcement ON or OFF.
OFF: The receive mode is not announced.
ON: The receive mode is announced when you
change the receive mode.
SPEECH > SCAN SPEECH (at Receive Pause)
(Default: OFF)
Turns the frequency announcement ON or OFF.
OFF: The frequency is not announced.
ON: When a signal is received during a scan, the
frequency and receive mode is announced.
L If the “S-Level SPEECH” item is set to “On,” S-Meter level
is also announced.
11
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8600 in the language / languages: English as an attachment in your email.

The manual is 22,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info