670434
23
Zoom out
Zoom in
Previous page
1/96
Next page
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
3-3
Selecting the antenna
D About the Programmable Tuning Step
function
You can preset the tuning step between 0.1 kHz and
999.9 kHz in 100 Hz steps.
1. Touch the TS indicator.
2. Touch
(Programmable TS icon).
The IC-R8600 has three antenna connectors: ANT1,
ANT2, and ANT3. You can use either ANT1, ANT2, or
ANT3 for receiving below 30 MHz.
1. Rotate
to set a frequency to below
30 MHz (10 kHz–29.999999 MHz).
The selected antenna connector indicator appears
under the receiving mode icon.
2. Touch the antenna connector indicator.
Each touch changes the selected antenna connector
(ANT1, ANT2 and ANT3).
L Next time you set the same frequency, the same
antenna connector is automatically selected.
Dial/Panel Lock function
D Dial Lock function
The Dial Lock function electronically locks
the dial to prevent frequency changes
caused by accidently moving
MAIN DIAL
.
z Hold down
SPEECH
for 1 second to turn
the Dial Lock function ON or OFF.
The [LOCK] LED lights while the
function is ON.
This function does not work when the
MENU, FUNCTION, QUICK menu,
Set mode or Scan Start screen is displayed.
LYou can change this setting on the MENU screen.
MENU
» SET > Function >
[SPEECH/LOCK] Switch
D Panel Lock function
The Panel Lock function locks all the controls on the
front panel except and .
z Push to turn the Panel Lock function ON or
OFF.
LP.LOCK indicator lights while the panel is locked.
Holding down
for 1 second turns the Dial Lock
function ON, and turns OFF the display.
The
indicator lights while the function is ON.
This function does not work when the MENU,
FUNCTION, QUICK menu, Set mode or Scan Start
screen is displayed.
LYou can set to lock only keys on the MENU screen.
MENU
» SET > Function > P.LOCK Key
D About the Auto Tuning Step function
When you rapidly rotate , the tuning speed
automatically accelerates.
LYou can change this setting on the MENU screen.
MENU
» SET > Function > MAIN DIAL Auto TS
3. Start entry with the kHz digits.
(Example: 20.5 kHz)
LTo clear the entry, touch [CE].
LPush
to chancel the entry.
LYou can also enter by rotating
.
Changing the Tuning Step (Continued)
4. Touch [ENT] to set the entered frequency.
Closes the Programmable TS screen.
Entry examples
14.2 kHz: [1], [4], [], [2], [ENT]
14.0 kHz: [1], [4], [ENT]
150 kHz: [1], [5], [0], [ENT]
Change 14.2 kHz to 14.5 kHz:
[], [5], [ENT]
(You can omit kHz digit entry.)
長く押す
白色に点灯
Lights white
Hold down for
1 second
TS indicator
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8600 in the language / languages: English as an attachment in your email.

The manual is 22,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info