670434

Icom IC-R8600 Manual

22
Zoom out
Zoom in
Previous page
1/96
Next page
3
BASIC OPERATION
3-2
Setting the frequency
z Rotate to set the receive frequency.
• The displayed frequency changes depending on the
selected tuning step.
D Directly entering a frequency
You can set the frequency with the keypad.
Example: Entering 383.000000 MHz
1. Touch the MHz digits.
2. Start entry with the MHz digits.
LTo clear the entry, touch [CE].
L To clear the entry and return to the previous screen,
push
EXIT
.
3. Touch [ENT] to set the entered frequency.
• Closes the F-INP screen.
L If you touch [ENT] when the digits under 100 kHz are
not entered, “0” will be automatically entered into the
blank digits.
Entry examples
• 14.025000 MHz: [1], [4], [•], [0], [2], [5], [ENT]
• 21.240000 MHz: [2], [1], [•], [2], [4], [ENT]
• 14 MHz: [1], [4], [ENT]
• 150 kHz: [0], [•], [1], [5], [ENT]
• Changing from 21.240000 MHz to 21.360000 MHz:
[•], [3], [6], [ENT]
(You can omit MHz digit entry.)
Changing the Tuning Step
Selecting the receiving mode (continued)
1. Touch the TS indicator.
2. Touch to select the tuning step. (Example: 20k)
•
The tuning step is set and returns to the previous screen.
InformationL
• S (Synchronous)-AM mode:
The Synchronous AM demodulation is a receive method that
mixes the incoming signal with a pure carrier frequency with
no level variation, then extracts one of the two sides (USB or
LSB) signal which is free from interferences.
This method is effective to reduce the distortions due to
fading, or interferences from adjacent stations.
• When the "D-STAR" and "FM" icons alternately blink:
Indicates that an FM signal is being received while in the
Digital (D-STAR) mode.
D About the Tuning Step (TS) function
By turning the Tuning Step function ON or OFF, you can
change the frequency in MHz steps or 10 Hz.
Changing the frequency in MHz steps:
z Touch the MHz digit for 1 second, then rotate
.
Changing the frequency in 10 Hz steps:
z Touch the kHz digit to turn OFF the TS function,
then rotate .
L To set the frequency in 1 Hz steps, directly enter the
frequency with the keypad.
The Tuning Step
function is ON.
The Tuning Step
function is OFF.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8600 in the language / languages: English as an attachment in your email.

The manual is 22,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info