12752
34
Zoom out
Zoom in
Previous page
1/48
Next page
31
8
SET MODE
Quick set mode items
Initial set mode items
DIMMER
This item toggles the intensity of the display back-
lighting between high or low.
Bright backlighting
(default).
HIGH
Dark backlighting.
LOW
BEEP
A beep sounds each time a switch is pushed for con-
rmation. This function can be turned OFF for silent
operation.
Confirmation beeps
ON (default).
ON
Confirmation beeps
OFF.
OFF
LOCK
This item sets the lock function to electronically lock
the main dial only or both the main dial and the panel
switches.
Only the main dial
can be locked (default).
DIAL
Both the main dial and panel
switches can be locked.
PANEL
AUTO TS
This item sets the auto tuning speed. The main dial
normally changes the frequency [400] × [tuning step]/
revolution. When auto tuning speed is turned on this
increases to [2000] × [tuning step]/revolution during
quick rotation of the dial.
The auto tuning speed
function is ON (default).
ON
The auto tuning speed
function is OFF.
OFF
HF ANT
This item sets the active HF antenna connector on
the rear panel. Either the 50 (SO-239 coaxial) or
500 (phono RCA connector) can be activated.
The SO-239 antenna con-
nector is activated (default).
50
The RCA (phono) connector
is activated.
500
REC REMO
This item activates/deactivates the REC REMOTE
jack on the front panel. When ON is selected, the
[REC REMOTE] jack is at a low level when the
squelch opens via the internal relay.
The REC REMOTE jack
can be used (default).
ON
The REC REMOTE jack has
no function and no relay
switching sound is heard.
OFF
REC SPCH
When the optional UT-102
VOICE SYNTHESIZER
is
installed and scan is in use, the detected frequency
is announced each time scan pauses, regardless of
the [SPCH/LOCK] switch. This announcement can
be turned ON and OFF.
The detected frequency is
announced when scan
pauses (default).
ON
The optional voice synthe-
sizer activates via the
[SPCH] switch only.
OFF
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8500 in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info