12
3
FREQUENCY SETTING
■ Using the main dial
Rotate the main dial to change the frequency.
• The frequency changes in increments determined by the
selected tuning step (see below).
• When the lock function is activated (“LOCK” appears) the
frequency cannot be changed.
D Selecting a tuning step
13 preset tuning steps are available plus 1 programma-
ble tuning step (see below). The preset tuning steps are:
10 50 100 Hz
1 2.5 5 9 10 12.5 20 25 100 kHz
1 MHz
Push [TSY] or [TSZ] to change the selected tuning
step.
D Setting the programmable tuning step
The programmable tuning step can be set between the
range of 0.5–199.5 kHz (in 0.5 kHz steps) for each
memory independently.
q Push the numeral keys on the keypad that corre-
spond to the tuning step you wish to program.
w Push [TSY] or [TSZ] to set the programmable tun-
ing step to the selected value.
• The programmable tuning step is automatically selected
as the active tuning step.
■ Lock function
The lock function electronically locks the indicated fre-
quency from accidentally being changed.
Push [
SPCH ] for 1 sec. to toggle the lock func-
tion ON and OFF.
•“LOCK” appears in the function display while the lock
function is activated.
D Setting the lock function coverage
The lock function can be set to lock the main dial only
or, the main dial and most of the front panel switches.
q Push [SLEEP ] for 1 sec. to enter quick set
mode.
w Rotate the [M-CH] selector to select the “LOCK”
indication.
e Rotate the main dial to set the lock function cover-
age to “DIAL” or “PANEL.”
r Push [SLEEP ] momentarily to exit quick set
mode.
