458647
54
Zoom out
Zoom in
Previous page
1/96
Next page
41
New2001
TONE SQUELCH AND POCKET BEEP
8
Tone squelch frequency/DTCS code setting
D Tone and DTCS squelches
The tone squelch (CTCSS) or DTCS squelch opens only
when receiving a signal containing a matching subaudible
tone or DTCS code, respectively. You can silently wait for a
specified signal using the same tone or code.
D Reverse tone/DTCS squelch
The reverse tone/DTCS squelch is convenient if you want
to ignore a specific signal. The receiver mutes the squelch
when a signal with the matched tone or code is received.
“T SQL-R” / “DTCS -R” is displayed when the reverse tone
squelch/reverse DTCS squelch is set.
D Pocket beep
These functions use subaudible tones or DTCS codes for
calling and can be used as a “common pager” to inform you
that someone has called while you were away from the re-
ceiver.
D Setting subaudible tones for tone squelch
88.5 Hz and 023 are set as the defaults for the tone squelch
frequency and the DTCS code, respectively. Other frequen-
cies and codes can be selected as desired.
q
Hold down [SET](TS) for 1 second to enter the Set mode.
w
Rotate [DIAL] to select the “EXPAND” item.
e
While holding down [FUNC], rotate [DIAL] to turn the
Expand set mode ON.
r
Rotate [DIAL] to select the TONE item when selecting
the tone squelch frequency; select the “CODE” item when
selecting the DTCS code.
Tone squelch frequency selection
DTCS code selection
After 1 sec.
After 1 sec.
t While holding down [FUNC], rotate [DIAL] to select a
desired subaudible tone frequency or DTCS code.
See the next page for details of available tone frequencies or
DTCS codes.
y Push [SET](TS) to exit the Set mode.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R6 in the language / languages: English as an attachment in your email.

The manual is 8,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info