Manual Icom IC-R6 (page 53 of 96) (English)

458647

Zoom out

Zoom in

1/96

PRIORITY WATCH

New2001

D VFO scan watch

q Select the channel(s) to be watched.

For a memory channel watch:

Select a desired memory channel.

For a memory scan watch:

➥ Push [V/M] to select the memory mode.

➥

Hold down [SCAN](MODE) for 1 second to enter the

scan type selection mode.

➥

Rotate [DIAL] to select a desired scan type, then push

[SCAN](MODE) again to start the memory/bank scan.

Hold down [SET](TS) for 1 second to enter the Set mode.

Rotate [DIAL] to select the priority watch set item.

While holding down [FUNC], rotate [DIAL] to select “ON.”

• Select “BELL” if the priority beep function is desired.

After 1 sec.

t Push [SET](TS) to exit the Set mode and start the watch.

• The “PRIO” icon appears.

y Hold down [SCAN](MODE) for 1 second to enter the scan

type selection mode.

Rotate [DIAL] to select a desired scan type from “ALL,”

“BAND,” “P-LINK x

(x= 0 to 9)” or “PROGxx (xx= 0–24).”

Push [SCAN](MODE) to start the VFO scan watch.

• The receiver checks the memory channel(s) every 5 seconds.

• The watch resumes according to the selected scan resume set-

ting. (p. 37)

During a VFO scan watch

Searches the VFO frequen-

cies for 5 seconds.

Pauses on a memory

channel when a signal is

received.

During a VFO scan watch with the priority beep

A beep tone sounds and the “S” icon blinks when a

signal is received on a memory channel.

o Push [SET](TS) to cancel the watch and scan.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R6 in the language / languages: English as an attachment in your email.

The manual is 8,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-R6 Manual

Product: