96
9
TONE SQUELCH OPERATION (Multi-function receiver/Component screens only)
■ DTCS polarity setting
As well as a code setting, the polarity setting is also available
for the DTCS operation. When a different polarity is set, the
DTCS never releases audio mute even when a signal with a
matching code number is received.
qClick zFMx to select FM mode.
wClick zDTCSx to turn the DTCS squelch ON.
• “DTCS” appears in the function display.
eRight-click zDTCSx to display the [DTCS] setting screen.
rSelect the DTCS polarity from “Normal” and “Reverse” in
[Polarity].
tClick the close button ([X]) to close the [DTCS] setting
screen.
■ Pocket beep operation
This function uses subaudible tones for calling and can be
used as a “common pager” to inform you that someone has
called while you were away from the receiver.
Pocket beep emission type can be set in the [Audio Setting]
screen. (p. 107)
qClick zFMx to select FM mode.
wClick zTSQLx (or zDTCSx) to turn the tone (or DTCS)
squelch ON.
• “TSQL” or “DTCS” appears in the function display.
eRight-click zTSQLx (or zDTCSx) to display the [TSQL] (or
[DTCS]) setting screen.
rCheck the [Pocket Beep] check box to turn the pocket
beep function ON.
• “”appears in the function display.
tClick the close button ([X]) to close the [TSQL] (or [DTCS])
setting screen.
