522360
22
Zoom out
Zoom in
Previous page
1/108
Next page
15
5
BASIC OPERATION
Lock function
This function electronically locks all keys (except for [PTT],
[DISTRESS] and [
]) to prevent accidental channel changes
and function access.
Push [CLEAR/
] for 1 second to turn the lock function
ON and OFF.
The lock function is automatically released when DSC call is
received, or [DISTRESS] is pushed.
Monitor function
The Monitor function opens the squelch by holding down
[VOL/SQL] for 1 second.
• “ ” appears while the function is activated.
The function can be set to “PUSH” or “HOLD” in the following
manner.
Select “Configuration” in the “MENU” screen. q
Select “Monitor” to enter the “Push” or “Hold” selecting mode. w
• Push:
The monitor function is activated by holding down [VOL/SQL]
for 1 second. The squelch opens while holding down the key.
• Hold: The monitor function is activated by holding down [VOL/
SQL] for 1 second. The squelch stays open until any key
is pushed.
AquaQuake water draining
function
The AquaQuake water draining function clears water away
from the speaker grill. Without this function, water may muffl e
the sound coming from the speaker. The transceiver emits a
vibrating beep when this function is activated.
While holding down [AQUA], the AquaQuake function is acti-
vated to clear water away from the speaker grill.
• Beep sounds, regardless of the volume level setting.
Activates for 10 seconds in maximum to drain water.
The transceiver never accepts key operation while the Aqua-
Quake function is activated.
The AquaQuake function can not be activated when an optional
speaker-microphone is connected.
Backlight setting
This function lights the function display and keys, and it is
convenient for night-time operation.
Select q [BKLT] to enter the backlight adjusting mode.
Push w []/[] or [Ω]/[≈] to adjust the brightness level be-
tween 1(minimum) to 7 (maximum) or OFF.
• The default setting is 4.
The display returns automatically to the main menu after 5 sec-
onds without no key operation is been performed.
The backlight automatically turns OFF when no key operation
is performed for 5 seconds.
Displayed when
the lock function
is activated.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M92D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M92D in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info