522360
21
Zoom out
Zoom in
Previous page
1/108
Next page
14
5
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Receiving and transmitting
CAUTION: Transmitting without an antenna will damage
the transceiver.
Hold down [ q
] for 1 second to turn power ON.
Set the volume and squelch levels with [VOL/SQL]. w
Push e
[Y](CH)/[Z](CH) to select the desired channel.
Further adjustment of the audio may be necessary at this point.
r Select [HI/LO] to select the output power if necessary.
HI” appears when high power is selected; “LOW” when low
power is selected.
Choose low power for short range communications, choose
high power for longer distance communications.
• Some channels are for low power only.
t
Hold down [PTT] to transmit, then speak into the microphone.
• “TX” appears.
• Channel 70 cannot be used for transmission.
y Release [PTT] to receive.
Information
The Noise Cancel function reduces random noise com-
ponents in the transmit and/or receive signal. See pag
e
86
for details
The transceiver monitors channel 70 every specifi c
time period even when standing by on an operating
channel.
DSC CHECK” is displayed when channel 70 is busy.
The channel 70 monitoring confi guration can be changed in
DSC Settings. See page 69 for details.
IMPORTANT:
To maximize the readability of your transmit-
ted signal, pause a few seconds after pushing [PTT], hold
the microphone 5 to 10 cm (2 to 4 inches) from your mouth
and speak into the microphone at a normal voice level.
NOTE: The transceiver has a power save function to con-
serve battery power. The power save function is activated
automatically when no signal is received for 5 seconds.
To prevent accidental prolonged transmission, the trans-
ceiver has a time-out timer function. This timer cuts a
transmission OFF after 5 minutes of continuous transmis-
sion.
q
Microphone
r
e
t
w
y
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M92D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M92D in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info