12680
70
Zoom out
Zoom in
Previous page
1/78
Next page
62
13
CONNECTION AND INSTALLATION
2001 NEW
AF/MOD Pin Pin name Description Specication
1 MOD+ Modulation input from an external Input impedance : 600
terminal unit. Input level : Approx. 0.77 V rms.
2 MOD Coaxial ground for NMD+.
3 GND Ground for digital equipment.
4 NAF+ AF detector output for an external Output impedance: 600
terminal unit. Output level : 0.252.5 mV rms
5 NAF Coaxial ground for NAF+.
6 GND Ground for digital equipment.
7 NC No connection.
8 SEND Transmits when grounded. Output level : 0.5 to 0.8 V
Input level : Less than 20 mA
9 GND Ground for digital equipment.
15
69
REMOTE Pin Pin name Description
1 DCD Input terminal for carrier detection.
2 RXD Input terminal for receive data. (RS-232C selection for REMOTE IF. (p. 52))
NMEA-OUT
NMEA0183 ver. 3.01 data output. (NMEA selection for REMOTE IF. (p. 52))
3 TXD Outputs transmit data. (RS-232C selection for REMOTE IF. (p. 52))
NMEA-IN NMEA0183 ver. 3.01 data input. (NMEA selection for REMOTE IF. (p. 52))
4 DTR Outputs data terminal ready signal.
5 GND Connected to the ground.
6 DSR
Input terminal for data-set-ready signal.
7 RTS Outputs request-to-send data.
8 CTS Input terminal for clear-to-send data.
9 NC No connection.
15
69
GPS Pin Pin name Description
1 NMEA + NMEA0183 ver 3.01 data input +.
2 NMEA _ Ground for NMEA data.
q
w
Connector information (continued)
IC-M802_USA.qxd 02.7.9 10:59 Page 62
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info