12680
69
Zoom out
Zoom in
Previous page
1/78
Next page
61
13
CONNECTION AND INSTALLATION
13
2001 NEW
Connector information
ACC Pin Pin name Description Specication
1 CWK CW and FSK keying input. Input level :
Less than 0.6 V for transmit
2 AF GND Ground line for AF signal.
Input/output pin. Ground level : 0.5 to 0.8 V
3 SEND Goes to ground when transmitting. Input current : Less than 20 mA
When grounded, transmits.
4 MOD Modulator input. Input impedance : 5 k
Usable when pin 3 is grounded. Input level : Approx. 100 mV rms
5 AF AF detector output. Output impedance: 4.7 k
Fixed, regardless of [VOL] position. Output level : 100300 mV rms
6 NC No connection
7 13.6 V 13.6 V output when power is ON. Output current : max. 1 A
8 ALC ALC voltage input. Control voltage : 3 to 0 V
Input impedance : More than 10 k
* DC GND Common ground.
1
2
3
4
5
6
7
8
MICROPHONE Pin Pin name Description Specication
1 MIC+ Audio input from the mic element. Input impedance : 2.4 k
2 NC No connection
3 AF1 AF output controlled with [VOL].
4 AF2 Ground for AF1.
5 PTT PTT switch input. When grounded, transmits.
6 GND Connected to the ground.
7 MIC Coaxial ground for MIC+.
8AF Coaxial ground for AF1 and AF2.
y
t
r
q
w
e
i
u
DC 13.6V Pin Pin name Description Specication
13 + DC input +. Max. power consumption 30 A typical.
46 _ DC input _.
1 2
4 6
3
5
TUNER Pin Pin name Description Specication
1 KEY Key signal input. 0.5 to 0.8 V during tuning
2 START Start/through signal output
3 13.6V 13.6 V output
4 E Negative terminal
5 NC No connection
6 NC No connection
65432
1
*
IC-M802_USA.qxd 02.7.9 10:59 Page 61
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info