12680
11
Zoom out
Zoom in
Previous page
1/78
Next page
3
2
PANEL DESCRIPTION
2
!2 FREQUENCY/CHANNEL SWITCH [FREQ/CH]
Selects indication type: (p. 8)
When channel comment indication is ON;
switches channel comment indication ON and
OFF.
When channel comment indication is OFF;
switches transmit frequency indication ON and
OFF.
After pushing [F], enters channel name pro-
gramming mode, when channel comment indica-
tion is ON. (p. 14)
!3 KEYPAD
Inputs numeral 1 for channel number
input, etc.
Inputs 1, Q, Z, q, z or space for
channel comment input.
After pushing [F], turns the noise
blanker function ON and OFF. (p. 11)
Inputs numeral 2 for channel number
input, etc.
Inputs 2, A, B, C a, b or c for
channel comment input.
After pushing [F], turns the squelch
function ON and OFF. (p. 11)
Inputs numeral 3 for channel number
input, etc.
Inputs 3, D, E, F, d, e or f for
channel comment input.
After pushing [F], starts and stops the
scan function. (p. 9)
Inputs numeral 4 for channel number
input, etc.
Inputs 4, G, H, I, g, h or i for
channel comment input.
After pushing [F], turns the speaker out-
put ON and OFF. (p. 10)
Inputs numeral 5 for channel number
input, etc.
Inputs 5, J, K, L, j, k or l for
channel comment input.
After pushing [F], turns the AGC OFF
function ON and OFF. (p. 11)
Inputs numeral 6 for channel number
input, etc.
Inputs 6, M, N, O, m, n or o for
channel comment input.
After pushing [F], enters the RF gain ad-
justment mode. (p. 11)
Inputs numeral 7 for channel number
input, etc.
Inputs 7, P, R, S, p, r or s for
channel comment input.
After pushing [F], selects low transmit
output power. (p. 10)
Inputs numeral 8 for channel number
input, etc.
Inputs 8, T, U, V, t, u or v for
channel comment input.
After pushing [F], selects middle trans-
mit output power. (p. 10)
Inputs numeral 9 for channel number
input, etc.
Inputs 9, W, X, Y, w, x or y for
channel comment input.
After pushing [F], selects high transmit
output power. (p. 10)
Inputs numeral 0 for channel number
input, etc.
Inputs 0 and symbols (-/.,()*
+<=>@) for channel comment input.
After pushing [F], selects LCD backlight
brightness.
Fixes input of channel number and chan-
nel comment, etc.
When pushed for 1 sec., stores pro-
grammed frequency, operating mode and
memory comment into a channel.
Clears entered digits and retrieves the
previous frequency, channel or channel
names during setting.
!4 FUNCTION SWITCH [F]
After pushing, activates the secondary functions.
•“ appears when a secondary function can be ac-
cessed.
!5 TUNE/THROUGH SWITCH [TUNE
THRU
]
Starts tuning when an optional antenna tuner is
connected.
•“TUNE appears when tuned.
When the tuner cannot tune the antenna, the tuning
circuit is bypassed automatically after 15 sec.
After pushing [F], bypasses the connected an-
tenna tuner. (p. 12)
•“THRU appears instead of TUNE indication.
This operation available for AT-140 and AH-3 only.
!6 MODE/SET SWITCH [MODE
SET
]
Push to select an operating mode.
J3E (USB), H3E (AM), LSB, J2B (AFSK), F1B (FSK),
and A1A (CW) modes are available, depending on
version or countries.
After pushing [F], enters quick set mode. (p. 48)
Enters DSC menu during DSC watch mode.
!7 E-MAIL SWITCH [e-mail] (p. 47)
Switches between e-mail operation mode and voice
operation mode when pushed.
IC-M802_USA.qxd 02.7.9 10:58 Page 3
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info