12680
10
Zoom out
Zoom in
Previous page
1/78
Next page
2
2
PANEL DESCRIPTION
2001 NEW
Front panel— Controller
q DISTRESS SWITCH [DISTRESS] (p. 18)
Push for 5 sec. (approx.) to make a distress call.
w DSC SWITCH [DSC]
Switches DSC watch mode and voice/e-mail com-
munication mode when pushed.
e CANCEL/CALL SWITCH [CANCEL/CALL]
Cancels a distress or DSC repeat call. (p. 20)
Push for 1 sec. to start calling after DSC contents
are setup.
r HEADPHONE JACK [ ]
Accepts headphones.
Output power: 5 mW with a 16 load (stereo/monaural)
10 mW for the Canadian version (monaural)
t MICROPHONE CONNECTOR [MIC]
Accepts the supplied or optional microphone.
See p. 66 for appropriate microphones.
See p. 61 for microphone connector information.
y GROUP SELECTOR [GRP]
Selects groups in 20 channel steps and ITU ma-
rine channel groups.
(p. 8)
Selects items during quick/initial set mode, etc.
u CHANNEL SELECTOR [CH]
Selects an operating channel within the selected
channel group such as ITU channels. (p. 8)
User channels can be selected from 1 to 160 (max.)
in sequence regardless of the channel group.
Changes setting or value of the selected item
during quick/initial set mode, etc.
i RX/CLARITY SWITCH [RX
CLAR
]
After pushing [F], turns the clarity function ON
and OFF. (p. 12)
[CH] is used for clarity control.
During DSC watch mode, enters RX memory se-
lect screen. (p. 38)
[CH] is used for distress and other call selection.
o POWER SWITCH [POWER]
Push to turn the power ON.
Push for 1 sec. to turn the power OFF.
!0 TX/TRANSMIT FREQUENCY SWITCH [TX
TXF
]
After pushing [F], displays the transmit fre-
quency, and opens the squelch. Checks and mon-
itors the transmit frequency while holding. (p. 10)
During DSC watch mode, enters TX memory se-
lect screen. (p. 43)
[CH] is used for memory selection.
!1 VOLUME CONTROL [VOL]
Adjusts the audio output level.
Audio does not come from the speaker when:
- The speaker switch is turned ON.
- The squelch function is turned ON and no signal is
being received.
- During DSC watch mode.
DISTRESS
q
w
e
r
t
yuio!0 !1
!2
!3
!4!5!6!7Function display (pgs. 6, 7)
IC-M802_USA.qxd 02.7.9 10:58 Page 2
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info