12678
69
Zoom out
Zoom in
Previous page
1/80
Next page
13
61
FREQUENCY PROGRAMMING
2001 NEW
12
13
Frequency selection
DD
Using the channel selector
q Select a channel which is programmed near the
frequency you want to receive.
w Push [RX
CLAR
] to select the frequency selection
mode.
•“ appears in the display.
e Rotate [GRP] to select the digit for tuning.
Under-bar shows the selected digit.
r Rotate [CH] to tune the frequency.
Pushing [Y]/[Z] on the microphone also tunes the fre-
quency.
t Repeat steps e and r to complete the frequency
selection.
y To return to the previous frequency, push
[RX
CLAR
].
•“ disappears.
0123
4A
CH
---GPS---
Lat
45
59'N
Lon134
44'E
16:23
RX J3E
SIMP
Ç
The under-bar is moved by rotating
[GRP].
0123
4A
CH
---GPS---
Lat
45
59'N
Lon134
44'E
16:23
RX J3E
SIMP
Ç
Ç and frequency show that the
frequency can be changed.
DD
Using the keypad
CAUTION: A frequency can be programmed into a
user or e-mail channel by pushing and holding
[ENT] for 1 sec. after entering a frequency. An ITU
simplex frequency can only be programmed on a
temporary basis. Keypad entry should be used only
on spare (or blank) channels.
q Rotate [GRP] and [CH], or enter a 1 to 4 digit num-
ber via the keypad, then push [ENT] to select the
memory channel to be used for general coverage
use.
When a blank channel is selected, operating frequency,
mode and channel name do not appear.
w Push [RX
CLAR
] to select the frequency selection
mode.
•“ appears in the display.
e Enter 4 to 6 digits of the desired frequency via the
keypad.
r Push [ENT] momentarily to input the frequency.
DO NOT hold [ENT] for more than 1 sec., otherwise the
frequency will be programmed into the channel.
[EXAMPLE]: Setting 12.3450 MHz
The set frequency can be cleared when [RX
CLAR
] is
pushed while setting.
Ç
Ç
Ç
Ç
0123
4A
CH
---GPS---
Lat
45
59'N
Lon134
44'E
16:23
RX J3E
SIMP
Ç
Select blank channel.
Push [RX
CLAR]
[1
NB]
[2
SQL], [3 SCAN],
[4
SP
×
], [5 AGC
×
]
[0
DIM]
[ENT]
0123
4A
CH
---GPS---
Lat
45
59'N
Lon134
44'E
16:23
IC-M801E_0.qxd 05.12.2 16:33 Page 61
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M801E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M801E in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info