12678
67
Zoom out
Zoom in
Previous page
1/80
Next page
59
12
CONNECTION AND INSTALLATION
12
2001 NEW
Connector information
MICROPHONE Pin Pin name Description Specication
1 MIC+ Audio input from the mic element. Input impedance : 2.4 k
2 NC No connection.
3 AF1 AF output controlled with [VOL].
4 AF2 Ground for AF1.
5 PTT PTT switch input. When grounded, transmits.
6 GND Connected to the ground.
7 MIC Coaxial ground for MIC+.
8AF Coaxial ground for AF1 and AF2.
y
t
r
q
w
e
i
u
AF/MOD Pin Pin name Description Specication
1 MOD+ Modulation input from an external Input impedance : 600
terminal unit. Input level : Approx. 0.77 V rms.
2 MOD Coaxial ground for MOD+.
3 AF+ AF detector output for an external Output impedance: 600
terminal unit. Output level : 0.252.5 V rms
4AF Coaxial ground for AF+.
5 SEND Transmits when grounded. Output level : 0.5 to 0.8 V
Input level : Less than 20 mA
6 CWK FSK keying input/output. When grounded, transmits.
7 13.6V 13.6 V DC output during power ON.
8 ALC ALC voltage input.
9 GND Ground for digital equipment.
15
69
REMOTE Pin Pin name Description
1 DCD Input terminal for carrier detection. (RS-232C selection for REMOTE IF. (p. 46))
NMEA-OUT ()
Ground for NMEA-OUT (+). (NMEA selection for REMOTE IF. (p. 46))
2 RXD Input terminal for receive data. (RS-232C selection for REMOTE IF. (p. 46))
NMEA-OUT (+)
NMEA0183 ver. 3.01 data output. (NMEA selection for REMOTE IF. (p. 46))
3 TXD Outputs transmit data. (RS-232C selection for REMOTE IF. (p. 46))
NMEA-IN (+)
NMEA0183 ver. 3.01 data input. (NMEA selection for REMOTE IF. (p. 46))
4 DTR Outputs data terminal ready signal. (RS-232C selection for REMOTE IF. (p. 46))
NMEA-IN ()
Ground for NMEA-IN (+). (NMEA selection for REMOTE IF. (p. 46))
5 GND Connected to the ground.
6 DSR
Input terminal for data-set-ready signal.
7 RTS Outputs request-to-send data.
8 CTS Input terminal for clear-to-send data.
9 NC No connection.
15
69
Front panel view
Front panel view
Front panel view
IC-M801E_0.qxd 05.12.2 16:33 Page 59
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M801E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M801E in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info