Manual Icom IC-M72 (page 22 of 40) (English)

12670

Zoom out

Zoom in

1/40

DUALWATCH/TRI-WATCH

■ Description

Dualwatch monitors Channel 16 while you are receiving

another channel; tri-watch monitors Channel 16 and the call

channel while receiving another channel.

■ Operation

q Select the desired operating channel.

w Push [SCAN•DUAL] for 1 sec. to start dualwatch or tri-

watch

(depending on the SET mode setting; p. 19).

•“DUAL” blinks during dualwatch; “TRI” blinks during tri-watch.

• A beep tone sounds when a signal is received on Channel 16.

• Tri-watch becomes dualwatch when receiving a signal on the call

channel.

e To cancel dualwatch/tri-watch, push [SCAN•DUAL] again.

DUALWATCH/TRI-WATCH SIMULATION

• If a signal is received on Channel 16, dualwatch/tri-watch

pauses on Channel 16 until the signal disappears.

• If a signal is received on the call channel during tri-watch,

tri-watch becomes dualwatch until the signal disappears.

• To transmit on the selected channel during dualwatch/tri-

watch, push and hold [PTT].

Dualwatch Tri-watch

Call channel

[Example]: Operating tri-watch on INT channel 07.

Signal is received

on the call channel.

A signal receive on

Channel 16 always

takes priority.

Tri-watch resumes

after the signal

disappears.

Tri-watch starts.

Push for 1 sec.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M72 in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-M72 Manual

Product: