58
13
HM-134 REMOTE-CONTROL MICROPHONE
■ Intercom operation
q Push and hold [DUAL•IC] for
1 sec. to activate the intercom
function.
• “IC” appears in the channel readout.
• The channel comment disappears.
w Push [PTT] to talk.
• “ ” appears in the channel com-
ment indicator.
e Release [PTT] to listen.
•“ ” appears in the channel comment indicator when the
transceiver is in talking mode.
r Push [DUAL•IC] to cancel the intercom function.
• Pushing [16] is also cancels the intercom function.
For your reference:
In case the intercom mode is selected with the transceiver
during microphone power OFF, the microphone power is au-
tomatically turned ON and the intercom mode is selected.
ïï
Intercom beep function
➥ Push and hold [DUAL•IC] for more than 1 sec.
• Emits intercom beep while holding.
■ Channel comments
q
Push [Y]/[Z] to select a channel to program the channel comment.
•While pushing and holding [H/L], push [DIAL] several times to
select the channel group (USA and INT), if desired.
w While pushing and holding [H/L], push [16•C].
• The 1st character of the currently programmed comment flashes.
e Push [Y]/[Z] to select a character.
r Push [SQL] to move to right; then push [Y]/[Z] to select a
character.
• Push [VOL] to move to left.
t Continue until the desired characters have been selected,
then push [16•C] to return to normal operation condition.
• Available characters