670412

Icom IC-FR9020 Manual

7
Zoom out
Zoom in
Previous page
1/20
Next page
222
4 CONTROL KNOB
4.1 VOLUME
Rotate the knob to change the volume level.
The volume level varies from 0 to 34. If the lo-
cal speaker is active, the audible beep level will
change as the knob is rotated.
Figure 1 shows the Volume at level 12.
Figure 1
4.2 SQUELCH CONTROL
Push the rotary knob once to select the squelch
level and then turn the knob to vary the level from
0 to 15. 0 is open squelch.
Figure 2 shows the Squelch at level 6.
Figure 2
4.3 LCD BACKLIGHT DIMMER
Push the rotary knob twice to select the dimmer
level and then turn the knob to select a level from
0 to 15. 0 is the darkest.
Figure 3 shows the Dimmer at level 5.
Figure 3
4.4 LCD BACKLIGHT TIMER
Push the rotary knob three times to adjust the
Backlight Timer. The time varies from 0 to 30 sec-
onds. This function is inactive when the backlight
has been turned ON with [SHIFT] + [1] (backlight
ON/OFF).
Figure 4 shows the Backlight Timer set for 15 sec-
onds.
Figure 4
5 CHANNEL SELECTION
The IC-FR9010/FR9020 has capability of up to 500
channels.
Push [CH], and then enter the channel number.
Example-1 CH-8; Push [CH] + [0] + [0] + [8] or [CH] +
[8] + [#]
Example-2 CH-500; Push [CH] + [5] + [0] + [0]
6 P25 CALLING SELECTION (Digital
Base Mode Only)
Push and release [A] repeatedly to scroll through the
menu. Radio displays GPC 00001 = Group 1 Call, GPC
every group = All Call, IDC--------- = Individual Call.
Figure 5 shows Talk Group Identification (TGID), Group
1 Call.
Figure 6 shows an All Call (everygroup), to everygroup
on the same NAC.
Figure 7 shows an Individual Call, to and individual unit
ID on the same NAC.
(Refer to Section 10, Figure 11 and 12 for ID entry.)
Figure 5
Figure 6
Figure 7
RX
TX
C001 TAC 2 MD N
Volume - 12
RX
TX
C001 TAC 2 MD N
Squelch - 6
RX
TX
C001 TAC 2 MD N
Dimmer - 5
RX
TX
C001 TAC 2 MD N
Light - 15
RX
TX
C001 TAC 2 MD N
GPC 00001
RX
TX
C001 TAC 2 MD N
GPC everygroup
RX
TX
C001 TAC 2 MD N
IDC--------------
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-FR9020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-FR9020 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info