670411
11
Zoom out
Zoom in
Previous page
1/20
Next page
6
11 KEY-LOCK
Push [SHIFT] + [8] to enable and disable the key-lock.
This symbol shows on the LCD. Key-lock and Key-
Unlock icon is displayed for 2 seconds and then reverts
to show the TGID. The [PTT], [MON] and [SHIFT] key
are not locked. If [PTT], [MON] and [SHIFT] needs to
be locked, select DISABLE in the programming soft-
ware. If the station is to be remotely controlled it is rec-
ommended to leave [PTT] enabled, remote [PTT] will
not work when [PTT] is locked. To release key lock,
push [SHIFT] + [8] again.
Figure 24 shows Key locked.
Figure 25 shows Key unlocked.
Figure 24
Figure 25
12 MANUAL CWID START AND
STOP
Push [SHIFT] + [A] to manually send the programmed
CWID.
CAUTION: The transmitter will energize immediately
when [A] is pushed.
To turn off CWID, push [SHIFT] + hold [B] for 2 sec-
onds. (This disables both programmed and manual
CWID.)
To return to normal operation, either reboot the radio
or push [SHIFT] + hold [B] for 2 seconds. (CWID must
be enabled in programming to use these functions.)
Figure 26 shows CWID Sending.
Figure 27 shows CWID function stop.
Figure 28 shows CWID function start.
Figure 26
Figure 27
Figure 28
13 DTMF ENCODE
Push [SHIFT] + [#] and then enter 0-9, [Q] or [#] to
transmit DTMF. The DTMF modulation level will be the
same as the CWID level.
Figure 29 displays DTMF Encode mode.
Figure 29
14 ANALOG CHANNEL DATA
Push [SHIFT] + [7] to scroll through the data. [7] must
be depressed to scroll.
1) RX width (narrow/wide/4 kHz)
2) TX width (narrow/wide/4 kHz)
3) Base mode (Simplex/Semi-duplex/Duplex/Repeat-
er)
4) RX CTCSS/DCS, CTCSS and DCS are used in RX
5) TX CTCSS/DCS, CTCSS and DCS are used in TX
6) TX RX Modulation type either PM or FM (PM is the
default)
(Depending on the pre-setting, this information cannot
be displayed. Ask your dealer for details.)
Figure 30 displays indicates a narrow channel during
scroll.
Figure 30
RX
TX
C001 TAC 2 MD N
Key-Unlock
CWID sending
Code: ICOM
C001 TAC 2 MD N
DTMF Encode
123456
MD N
RX
TX
C001 TAC 2 MD N
RX Narrow Channel
RX
TX
C001 TAC 2 MD N
Key-Lock
RX
TX
C001 TAC 2 MD N
CWID function stop
RX
TX
C001 TAC 2 MD N
CWID function start
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-FR9010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-FR9010 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info