670411
8
Zoom out
Zoom in
Previous page
1/20
Next page
3
6.1 INDIVIDUAL CALL ENTRY (Digital Base
Mode Only)
Push and release [A] repeatedly until “IDC-----” is
displayed.
Push [B], and enter the numerical Unit ID.
To deleted a digit, push the star [Q] key. Push [B]
or [#] to complete entry.
Figure 8 shows entry start, when [B] is pushed.
Figure 9 shows completed entry, [1] + [2] + [3] +
[4] + [5] + [B].
Figure 8
Figure 9
7 P25 PTT MODE
Push [D] to select PTT (Push-To-Talk) mode.
When the display shows PTT is Analog, the radio
transmits in analog mode.
When the display shows PTT is Digital, the radio trans-
mits in digital mode.
Figure 10 shows Analog.
Figure 11 shows Digital.
Figure 10
Figure 11
8 P25 CONVENTIONAL CONTROL
SIGNALLING (SBC) (DIGITAL
BASE MODE ONLY)
NOTE: SBC functions are selectable in the Program-
ming Software. The IC-FR9010/FR9020 has
been developed to work with any P25 radio
under the TIA specifications. However not all
subscriber radios have the capability of these
functions.
8.1 EMERGENCY MODE TX/RX
Push and hold the [F] key to send an Emergency
Call.
Reboot the radio to clear the Emergency Alert.
NOTE: The radio will transmit on the programmed
EMERGENCY channel not necessarily the
channel that appears on the display.
EMERGENCY MODE RX
To clear a received Emergency call, push and re-
lease [F] twice.
Push [F] to enter the SBC mode.
Key functions after entering menu selection;
Push [A] for the next and [B] for the previous menu
item.
[C] stops transmission. (The radio transmits the
SBC 4 times until acknowledged.)
[ D] moves the cursor between items within the se-
lection.
[Q] deletes the last digit.
[#] transmits the selected SBC mode.
NOTE: When the radio is in SBC mode, it can re-
ceive Group calls, All Call and Individual
calls but no source address (caller unit ID)
is displayed. Emergency calls can be re-
ceived when in SBC mode but the radio
gives priority to Radio Inhibit. Both Emer-
gency and Radio Inhibit are ignored when
in SBC transmitting mode.
The radio will revert to normal operation if no key
is pushed for 10 seconds.
RX
TX
C001 TAC 2 MD N
IDC __
RX
TX
C001 TAC 2 MD N
IDC 12345
RX
TX
C001 TAC 2 MA N
PTT is Analog
RX
TX
C001 TAC 2 MD N
PTT is Digital
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-FR9010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-FR9010 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info