670362
24
Zoom out
Zoom in
Previous page
1/48
Next page
20
4
BIIS OPERATION
DD
Group call
q When a group call is received;
Beeps sound.
•“ appears and the mute is released.
The programmed text message (e.g.GROUP) and the calling sta-
tion ID (or text) is displayed when the indication mode is 2 lines.
The programmed text message (e.g.GROUP) and the calling
station ID (or text) is displayed alternately when the indication
mode is 1 line, depending on the setting.
•“ appears or blinks depending on the setting.
w Push and hold [PTT], then speak into the microphone at a
normal voice level.
TX indicator lights red.
NOTE: Only one station is permitted to speak.
e Release [PTT] to return to receive.
BUSY indicator lights green while receiving a signal.
r To nish the conversation, push [MONITOR] (Moni(Audi))
to send the Clear down signal.
Either station can send a Clear down signal.
•“CLR DOWN is displayed for 2 sec. (approx.)
•“ disappears and the transceiver returns to the standby con-
dition.
DD
Displaying the received call record
Queue indication
The transceiver memorizes the calling station ID in the mem-
ory. Up to 3 calls can be memorized, and the oldest call
record is erased when a 4th call is received. However, once
the transceiver is powered OFF, the all records are cleared.
q Push and hold [P1] (Digital) for 1 sec.
Displays following indication.
When a record is available
When no record is available
w Push [Up] or [Down] to select the desired call.
e Push and hold [P1] (Digital) for 1 sec. again to return to the
standby condition.
When no operation is performed for 30 sec., the transceiver
returns to the standby condition automatically.
X
X
X
Appears Appears or blinks
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 20 (1,1)
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F80DT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F80DT in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info