670362
23
Zoom out
Zoom in
Previous page
1/48
Next page
19
4
BIIS OPERATION
3
4
Default setting
The following functions are assigned to each programmable
key as the default. However, the assigned function can be
changed by your dealer. Ask your dealer for details.
During digital mode operation, BIIS is not available.
NOTE: [TX Code Enter] must be assigned to a key.
[P0]; Call : Push to transmit a 5-tone/BIIS call
when the selected channel is a 5-tone
or BIIS channel.
CALL is displayed on the key indicator.
[P1]; Digital : Push to select the call list ID/transmit
message, or to display the receive
message record for selection.
BIFN is displayed on the key indicator.
When this key is pushed, BIFN is
inverted as “”.
[P3]; TX Code Enter : Push to enter the ID code edit mode
directly for both 5-tone and BIIS.
TXCE is displayed on the key indicator.
[P2]; Null : No function is assigned.
[MONI]; Moni(Audi) : Push this key after the communica-
tion to send a Clear down signal dur-
ing BIIS channel operation.
[Up]/[Down]; CH Up/Down
: While in the standby condition,
selects the operating channel.
After pushing [Digital] or [TX Code
CH Select], selects call list or TX code
channel, respectively.
Receiving a call
DD
Individual call
q When an individual call is received;
Beeps sound.
•“ appears and the mute is released.
The programmed text message (e.g.CALLING) and the calling
station ID (or text) is displayed when the indication mode is 2
lines.
The programmed text message (e.g.CALLING) and the calling
station ID (or text) is displayed alternately when the indication
mode is 1 line, depending on the setting.
•“ appears or blinks depending on the setting.
w Push and hold [PTT], then speak into the microphone at a
normal voice level.
TX indicator lights red.
e Release [PTT] to return to receive.
BUSY indicator lights green while receiving a signal.
r To nish the conversation, push [P4] (Moni(Audi)) to send
the Clear down signal.
Either station can send a Clear down signal.
•“CLR DOWN is displayed for 2 sec. (approx.).
•“ disappears and the transceiver returns to the standby condi-
tion.
X
Appears Appears or
blinks
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 19 (1,1)
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F80DT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F80DT in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info