12506
15
Zoom out
Zoom in
Previous page
1/32
Next page
11
4
PASSPORT OPERATION
Transmitting a call
D Group call
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the Passport system channel or talk group in
which the group ID is pre-programmed.
w While pushing and holding [PTT], speak into the micro-
phone at a normal voice level after a beep is emitted.
If an error beep is emitted, release [PTT]. After a while, repeat
step w again.
The beep can be turned OFF in User set mode.
When the transceiver is out of the communication area, “”
disappears, and NO SVC message appears.
D Individual call
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the Passport system channel or talk group in
which the MID (Mobile ID) is pre-programmed.
w While pushing and holding [PTT], speak into the micro-
phone at a normal voice level after a beep is emitted.
If an error beep is emitted, release [PTT]. After a while, repeat
step w again.
The beep can be turned OFF in User set mode.
When the transceiver is out of the communication area, “”
disappears, and NO SVC message appears.
e To finish the conversation, push [DOWN] to send the
Clear Down signal.
D Selective call (DTMF call)
—Optional UT-108 is required—
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the Passport system channel or talk group.
w Push [Send DTMF] a DTMF encode channel appears.
e Push [UP] or [DOWN] to select the desired DTMF encode
channel.
r Push [PTT] to transmit the selected DTMF code in the
selected DTMF channel.
Push [P0] to cancel the DTMF transmission.
D Phone call (Available for 10-keypad version only)
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the Passport system channel or talk group.
w Push [Phone request] to enable the phone call.
•“ appears.
e Push [PTT] to connect the phone line.
The proceed tone is emitted after connection to the phone line.
r While pushing and holding [PTT], enter the phone number
via the 10-keypad to make the call. Then release [PTT].
t Push [PTT] to transmit; release to receive.
y Push [#] while pushing [PTT] to nish the communication.
Appears
!IC-F43TR-1.qxd 04.3.17 9:21 AM Page 11 (1,1)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F43TR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F43TR in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info