12506
13
Zoom out
Zoom in
Previous page
1/32
Next page
9
3
BASIC OPERATION
Turning power ON
q Rotate [VOL] to turn the power ON.
w If the transceiver is programmed for a start up passcode,
input the digit codes as directed by your dealer.
The keys in the table below can be used for password input:
The transceiver detects numbers in the same block as identical.
Therefore 01234 and 56789 are the same.
e When the PASSWORD indication does not clear after
inputting 4 digits, the input code number may be incorrect.
Turn the power off and start over in this case.
Channel selection
Push [UP] or [DOWN], or rotate [ROTARY SELECTOR] to
select the desired system channel or talk group, in sequence.
Up to 16 pre-programmed channels can be selected via [ROTARY
SELECTOR].
Call procedure
When your system employs tone signalling (excluding
CTCSS and DTCS), the call procedure may be necessary
prior to voice transmission. The tone signalling employed may
be a selective calling system which allows you to call specic
station(s) only and prevent unwanted stations from contact-
ing you.
q Select the desired DTMF encode channel according to
your System Operators instructions.
This may not be necessary depending on programming.
Refer to pgs. 11, 14, 16 for selection.
w Push the [PTT].
e After transmitting a DTMF code, the remainder of your
communication can be carried out in the normal fashion.
Selective calling
Non-selective calling
KEY
NUMBER
0
5
4
9
3
8
2
7
1
6
UP
!IC-F43TR-1.qxd 04.3.17 9:21 AM Page 9 (1,1)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F43TR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F43TR in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info