670354
63
Zoom out
Zoom in
Previous page
1/182
Next page
6
MENU SCREEN
6-9
Call List Select
Selects a calling destination. After selecting, push
[PTT] to transmit the voice call to the selected
destination. (pp. 7-3, 7-4)
Call Menu
In the Analog mode (MDC 1200 only)
Selects a calling destination and a call type (Call
Alert, Radio Check, Stun, Revive, and Sel Call).
After selecting, push [PTT] to transmit the call to the
selected destination. (pp. 8-5, 8-7, 8-9, 8-11, 8-13)
In the Digital mode
Selects a calling destination and a call type (Status,
Message, Write Message, Call Alert, Remote Monitor,
Radio Check, Stun, Revive, and Kill). After selecting,
push [PTT] to transmit the call to the selected
destination. (pp. 7-5, 7-7, 7-9 ~ 7-13)
NOTE: When the call type is “Status,” “Message,”
or “Write Message,” you can select or directly enter
a message before transmitting it. After selecting or
entering a message, push [PTT] to transmit it. See
pages 7-5, 7-7, and 7-9 for details.
Clear Incoming
In the Digital mode
Clears the received call log from the Incoming list.
(p. 7-22)
Clear Outgoing
In the Digital mode
Clears the transmit call log from the Outgoing list.
(p. 7-23)
DTMF Autodial
In the Analog mode
In the Digital mode
Displays the “DTMF Autodial” screen. Then, push
[Up] or [Down] to select a DTMF code. After selecting,
push [PTT] to transmit the selected DTMF code.
Group Select
Displays the “Group Select” screen. Then, push [Up]
or [Down] to select a Group ID from the Call List. After
selecting, push [PTT] to transmit a Group call. (p. 7-4)
Signaling/Call
Incoming
In the Analog mode (MDC 1200 only)
In the Digital mode
Displays a log of the received Individual call, Call Alert
call, Status message, and Message. (pp. 7-20, 8-22)
Individual Select
Displays the “Individual Select” screen. Then, push
[Up] or [Down] to select a Individual ID from the Call
List. After selecting, push [PTT] to send a Individual
call. (p. 7-3)
Message
In the Analog mode (MDC 1200 only)
In the Digital mode
Displays the “Message” screen. Then, push [Up] or
[Down] to select a message. After selecting, push
[PTT] to send the Message to the currently selected
destination. (pp. 7-8, 8-16)
Outgoing
In the Digital mode
Displays a log of the transmitted Individual calls and
Call Alert calls. (p. 7-21)
Status
In the Analog mode (MDC 1200 only)
In the Digital mode
Displays the “Status” screen. Then, push [Up] or
[Down] to select a status message. After selecting,
push [PTT] to send the message to the currently
selected destination. (pp. 7-6, 8-14)
Write Message
In the Digital mode
Enables the user to directly enter a message. After
entering, push [PTT] to transmit it. (p. 7-9)
Previous view
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F3400D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F3400D in the language / languages: English as an attachment in your email.

The manual is 9,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info