670354
62
Zoom out
Zoom in
Previous page
1/182
Next page
6
MENU SCREEN
6-8
C.Tone CH Select
In the Analog mode
Sets the Continuous tone channel. (p. 3-5)
Compander
In the Analog mode
Turns the Compander function ON or OFF.
This function reduces noise components on the
transmit audio for clear communication.
Priority A CH
Selects the Priority A channel. (p. 3-4)
Prio A (Rewrite)
Sets a current channel as the Priority A channel.
(p. 3-5)
Priority B CH
Selects the Priority B channel. (p. 3-4)
Prio B (Rewrite)
Sets a current channel as the Priority B channel.
(p. 3-5)
RAN CH Select
In the Digital mode
Sets the RAN channel. (p. 3-6)
RF Power
Selects the output power for each channel.
• Options: Low 1, Low 2, High
L “Low 1” is the lowest power level, and “High” is the
highest power level.
L Lower output power during short-range communications
may reduce the possibility of interference to other
stations.
Scan Tag
Sets or clears a Scan tag to or from a channel in a
Scan list. (p. 5-6)
Scan List
Sets a Scan list to be scanned. (p. 5-4)
Scan Start/Stop
Starts or cancels a Scan.
A Scan checks for signals on each channel and stops
when a signal is received.
Scramble/Encrypt
In the Analog mode
Turns the Voice Scrambler function ON or OFF.
This function enables private communication between
stations using a Scramble code.
L The same Scramble code must be set in all stations to
communicate.
In the Digital mode
Turns the Encryption function ON or OFF.
This function enables private communication between
stations using an Encryption Key and Key ID.
L The same Encryption Key and Key ID must be set in all
stations to communicate.
Talk Around
Turns the Talk Around function ON or OFF.
The Talk Around function equalizes the transmit
frequency to the receive frequency, for direct
(Simplex) communication.
Zone Select
Selects a Zone. (p. 3-3)
Channel/Scan
Previous view
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F3400D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F3400D in the language / languages: English as an attachment in your email.

The manual is 9,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info