Manual Icom IC-910H (page 9 of 88) (English)

12390

Zoom out

Zoom in

1/88

PANEL DESCRIPTION

•Enters numeral “1” when entering an operating

frequency. (p. 23)

•Switches between VFO and memory mode.

(p. 40)

Enters numeral “2” when entering an operating

frequency. (p. 23)

•Enters numeral “3” when entering an operating

frequency. (p. 23)

•Switches between VFO A and B during VFO

mode operation. (p. 21)

Enters numeral “4” when entering an operating

frequency. (p. 23)

Enters numeral “5” when entering an operating

frequency. (p. 23)

Enters numeral “6” when entering an operating

frequency. (p. 23)

Enters numeral “7” when entering an operating

frequency. (p. 23)

•Enters numeral “8” when entering an operating

frequency. (p. 23)

•Stores the displayed operating conditions into

MEMO PAD channel (p. 44)

•Enters numeral “9” when entering an operating

frequency. (p. 23)

•Re-calls the contents in the MEMO PAD channel.

(p. 44)

•Enters decimal point “.” for entering below the

“MHz“ digits when entering an operating fre-

quency.

• Starts and cancels scanning function. (p. 46)

•Turns OFF the SUB band frequency indication

during satellite operation. In this case, only the

MAIN band frequency can be tuned by rotating

the tuning dial. (p. 49)

•Enters numeral “0” when entering an operating

frequency. (p. 23)

•Switches sweep function for the bandscope ON

and OFF. (p. 29)

•Turns OFF the MAIN band frequency indication

during satellite operation. In this case, only the

SUB band frequency can be tuned by rotating

the tuning dial. (p. 49)

Enables operating frequency entering from the

keypad. See page 23 for details.

Equalizes the condition of the VFO A and B.

(p. 21)

Shows 10 Hz and 1 Hz digits of operating fre-

quency on both the MAIN and SUB bands while

pushing and holding. (p. 22)

Stores the set conditions into a memory channel.

(p. 41)

Clears stored contents of memory channel to be

a blank channel. (p. 43)

Transfers the contents of a memory channel into

either the VFO A or B. (p. 42)

Opens squelch for monitoring the operating or

transmit frequency, and the frequency indication

automatically changes to transmit frequency in the

case of duplex or split operation. (p. 34)

Starts and cancels tone scan when the repeater

tone or tone squelch is activated in FM (narrow)

operation. (p. 47)

Used to change memory channel during memory

mode operation by rotating the tuning dial while

pushing and holding. (p. 40)

Switch Switch action when pushed Switch action when pushed for 1 sec.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-910H in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-910H Manual

Product: