12376

Icom IC-7800 Manual

183
Zoom out
Zoom in
Previous page
1/206
Next page
14-4
DD
Command table (continued)
14
CONTROL COMMAND
Command Sub command Description
15 01 Read squelch condition
02 Read S-meter level
11 Read RF power meter
12 Read SWR meter
13 Read ALC meter
14 Read COMP meter
15 Read VD
meter
16 Read I
D meter
16 02 Preamp (0=OFF; 1=preamp 1;
2=preamp 2)
12 AGC selection (0=OFF; 1=Slow;
2=Mid; 3=Fast)
22 Noise blanker (0=OFF; 1=ON)
32 Audio peak filter (0=OFF;
1=320 Hz; 2=160 Hz; 3=80 Hz)
40 Noise reduction (0=OFF; 1=ON)
41 Auto notch (0=OFF; 1=ON)
42 Repeater tone (0=OFF; 1=ON)
43 Tone squelch (0=OFF; 1=ON)
44 Speech compressor
(0=OFF; 1=ON)
45 Monitor (0=OFF; 1=ON)
46 VOX function (0=OFF; 1=ON)
47 Break-in (0=OFF; 1=semi break-
in; 2=full break-in)
48 Manual notch (0=OFF; 1=ON)
4C VSC (0=OFF; 1=ON)
4D Manual AGC (0=OFF; 1=ON)
4E DIGI-SEL (0=OFF; 1=ON)
4F Twin peak filter (0=OFF; 1=ON)
50 Dial lock (0=OFF; 1=ON)
19 00 Read the transceiver ID
1A 00 Send/read memory contents (see
p. 14-9 for details)
01 Send/read band stacking register
contents (see p. 14-9 for details)
02 Send/read memory keyer con-
tents (see p. 14-9 for details)
03 Send/read the selected filter width
(SSB, CW, PSK: 0=50 Hz to
40=3600 Hz; RTTY: 0=50 Hz to
31=2700 Hz; AM: 0=200 Hz to
49=10 kHz)
04 Send/read the selected AGC time
constant (0=OFF, 1=0.1/0.3 sec.
to 13=6.0/8.0 sec.)
050001 Send/read SSB TX Tone (Bass)
level (0 =–5 to 10=+5)
050002 Send/read SSB TX Tone (Treble)
level (0=–5 to 10=+5)
050003 Send/read SSB RX Tone (Bass)
level (0 =–5 to 10=+5)
050004 Send/read SSB RX Tone (Treble)
level (0=–5 to 10=+5)
050005 Send/read AM TX Tone (Bass)
level (0 =–5 to 10=+5)
050006 Send/read AM TX Tone (Treble)
level (0=–5 to 10=+5)
050007 Send/read AM RX Tone (Bass)
level (0 =–5 to 10=+5)
050008 Send/read AM RX Tone (Treble)
level (0=–5 to 10=+5)
050009 Send/read FM TX Tone (Bass)
level (0 =–5 to 10=+5)
050010 Send/read FM TX Tone (Treble)
level (0=–5 to 10=+5)
Command Sub command Description
1A 050011 Send/read FM RX Tone (Bass)
level (0 =–5 to 10=+5)
050012 Send/read FM RX Tone (Treble)
level (0=–5 to 10=+5)
050013 Send/read SSB TX bandwidth for
wide (see p. 14-10 for details)
050014 Send/read SSB TX bandwidth for
mid. (see p. 14-10 for details)
050015 Send/read SSB TX bandwidth for
narrow (see p. 14-10 for details)
050016 Send/read speech level (0=0% to
255=100%)
050017 Send/read CW side tone gain
(0=min. to 255=max.)
050018 Send/read CW side tone gain limit
(0=OFF, 1=ON)
050019 Send/read beep gain (0=min. to
255=max.)
050020 Send/read beep gain limit (0=OFF,
1=ON)
050021 Send/read headphones output
ratio (0=0.60 to 255=1.40)
050022 Send/read headphone output
selection (0=separated, 1=mixed)
050023 Send/read AF/SQL signal output
to ACC-A (0=Main; 1=Sub)
050024 Send/read AF/SQL signal output
to ACC-B (0=Main; 1=Sub)
050025 Send/read AF output level to
ACC-A (0=0% to 255=100%)
050026 Send/read AF output level to
ACC-B (0=0% to 255=100%)
050027 Send/read S/P DIF output level
(0=0% to 255=100%)
050028 Send/read MOD output level to
ACC-A (0=0% to 255=100%)
050029 Send/read MOD output level to
ACC-B (0=0% to 255=100%)
050030 Send/read S/P DIF MOD output
level (0=0% to 255=100%)
050031 Send/read MOD input connector
during DATA OFF
(0=MIC; 1=ACC-A; 2=ACC-B;
3=MIC/ACC-A; 4=MIC/ACC-B;
5=ACC-A/ACC-B; 6=MIC/ACC-
A/ACC-B; 7=S/P DIF)
050032 Send/read MOD input connector
during DATA1
(0=MIC; 1=ACC-A; 2=ACC-B;
3=MIC/ACC-A; 4=MIC/ACC-B;
5=ACC-A/ACC-B; 6=MIC/ACC-
A/ACC-B; 7=S/P DIF)
050033 Send/read MOD input connector
during DATA2
(0=MIC; 1=ACC-A; 2=ACC-B;
3=MIC/ACC-A; 4=MIC/ACC-B;
5=ACC-A/ACC-B; 6=MIC/ACC-
A/ACC-B; 7=S/P DIF)
050034 Send/read MOD input connector
during DATA3
(0=MIC; 1=ACC-A; 2=ACC-B;
3=MIC/ACC-A; 4=MIC/ACC-B;
5=ACC-A/ACC-B; 6=MIC/ACC-
A/ACC-B; 7=S/P DIF)
… 183 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7800 in the language / languages: English as an attachment in your email.

The manual is 26,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info