Manual Icom IC-7800 (page 182 of 206) (English)

12376

182

Zoom out

Zoom in

1/206

14-3

Command table

CONTROL COMMAND

Command Sub command Description

00 — Send frequency data

01 Same as Send mode data

command 06

02 — Read band edge frequencies

03 — Read operating frequency

04 — Read operating mode

05 — Set operating frequency

06 00 Select LSB

01 Select USB

02 Select AM

03 Select CW

04 Select RTTY

05 Select FM

07 Select CW-R

08 Select RTTY-R

12 Select PSK

13 Select PSK-R

07 — Select VFO mode

B0 Exchange main and sub bands

B1 Equalize main and sub bands

C0 Turn the dualwatch OFF

C1 Turn the dualwatch ON

D0 Select main band

D1 Select sub band

08 — Select memory mode

0001–0101* Select memory channel

*P1=0100, P2=0101

09 — Memory write

0A — Memory to VFO

0B — Memory clear

0E 00 Scan stop

01 Programmed/memory scan start

02 Programmed scan start

03 ∂F scan start

12 Fine programmed scan start

13 Fine ∂F scan start

22 Memory scan start

23 Select memory scan start

A1–A7 Set ∂F scan span (A1=±5 kHz;

A2=±10 kHz; A3=±20 kHz;

A4=±50 kHz; A5=±100 kHz;

A6=±500 kHz; A7=±1 MHz)

B0 Set as non-select channel

B1 Set as select channel (1=★1;

2=★2; 3=★3; when no data com-

mand is specified, the previously

set number or “★1” is selected)

B2 Set the number for select memory

scan (0=ALL; 1=★1; 2=★2; 3=★3)

D0 Set scan resume OFF

D3 Set scan resume ON

0F 00 Turn the split function OFF

01 Turn the split function ON

10 00 Select 10 Hz (1 Hz) tuning step

01 Select 100 Hz tuning step

02 Select 1 kHz tuning step

03 Select 5 kHz tuning step

04 Select 9 kHz tuning step

05 Select 10 kHz tuning step

06 Select 12.5 kHz tuning step

07 Select 20 kHz tuning step

08 Select 25 kHz tuning step

Command Sub command Description

11 — Select/read attenuator (0=OFF;

1=3 dB; 2=6 dB; 3=9 dB; 4=12 dB;

5=15 dB; 6=18 dB; 7=21 dB)

12 00 + RX ANT Select/read ANT1 selection

(00=RX ANT OFF; 01=RX ANT ON)

01 + RX ANT Select/read ANT2 selection

(00=RX ANT OFF; 01=RX ANT ON)

02 + RX ANT Select/read ANT3 selection

(00=RX ANT OFF; 01=RX ANT ON)

03 + RX ANT Select/read ANT4 selection

(00=RX ANT OFF; 01=RX ANT ON)

13 00 Announce with voice synthesizer

01 (00=all data; 01=frequency and

02 S-meter level; 02=receive mode)

14 01 + Level data [AF] level setting (0=max. CCW to

255=max. CW)

02 + Level data [RF] level setting (0=max. CCW to

255=11 o’clock)

03 + Level data [SQL] level setting (0=11 o’clock to

255=max. CW)

05 + Level data [APF] level setting

(0=Pitch–550 Hz, 128=Pitch,

255=Pitch+550 Hz; 10 Hz steps)

06 + Level data [NR] level setting (0=min. to

255=max.)

07 + Level data Inside [TWIN PBT] setting or IF

shift setting (0=max. CCW,

128=center, 255=max. CW)

08 + Level data Outside [TWIN PBT] setting

(0=max. CCW, 128=center,

255=max. CW)

09 + Level data [CW PITCH] setting (0=300 Hz,

128=600 Hz, 255=900 Hz; 5 Hz

steps)

0A + Level data [RF POWER] setting (0=max.

CCW to 255=max. CW)

0B + Level data [MIC] setting (0=max. CCW to

255=max. CW)

0C + Level data [KEY SPEED] setting (0=max.

CCW to 255=max. CW)

0D + Level data [NOTCH] setting (0=low freq. to

255=high freq.)

0E + Level data [COMP] setting (0=max. CCW to

255=max. CW)

0F + Level data [DELAY] setting (0=max. CCW to

255=max. CW)

11 + Level data [AGC] control setting (0=max.

CCW to 255=max. CW)

12 + Level data [NB] control setting (0=max. CCW

to 255=max. CW)

13 + Level data [DIGI-SEL] setting (0=max. CCW

to 255=max. CW)

14 + Level data [DRIVE] setting (0=max. CCW to

255=max. CW)

15 + Level data [MONI GAIN] setting (0=max.

CCW to 255=max. CW)

16 + Level data [VOX GAIN] setting (0=max.

CCW to 255=max. CW)

17 + Level data [ANTI VOX] setting (0=max. CCW

to 255=max. CW)

18 + Level data [CONTRAST] setting (0=max.

CCW to 255=max. CW)

19 + Level data [BRIGHT] setting (0=max. CCW

to 255=max. CW)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7800 in the language / languages: English as an attachment in your email.

The manual is 26,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-7800 Manual

Product: