Manual Icom IC-7800 (page 161 of 206) (English)

12376

161

Zoom out

Zoom in

1/206

12-18

SET MODE

Selects [DIGI-SEL] control function from DIGI-SEL

and APF.

• DIGI-SEL : [DIGI-SEL] control functions as the digi-

tal selector operation. (default)

• APF : [DIGI-SEL] control functions as the

audio peak filter adjustment.

Sets the rate at which frequencies are scanned when

the microphone [UP]/[DN] switches are pushed and

held. High or low can be selected.

• HIGH : High speed (default; 50 tuning steps/sec.)

• LOW : Low speed (25 tuning steps/sec.)

Selects the RIT/∂TX frequency clearing instruction

with the [CLEAR] switch.

• ON : Clears the RIT/∂TX frequency when [CLEAR]

is pushed momentarily.

• OFF : Clears the RIT/∂TX frequency when [CLEAR]

is pushed for 1 sec. (default)

Selects notch functions for SSB mode operation from

Auto, Manual and Auto/Manual.

• Auto : The auto notch can only be used.

• Manual : The manual notch can only be used.

• Auto/Manual : Both the auto and manual notch can

be used. (default)

Selects notch functions for AM mode operation from

Auto, Manual and Auto/Manual.

• Auto : The auto notch can only be used.

• Manual : The manual notch can only be used.

• Auto/Manual : Both the auto and manual notch can

be used. (default)

■ Miscellaneous (Others) set mode (continued)

Selects filter set screen indication condition from Fix

and Auto (by FILTER,PBT Operation).

• Fix : When filter screen accessed with the main

band’s [FILTER] switch, the screen shows

main band’s filter width and PBT conditions

only; when filter set screen accessed with the

sub band’s [FILTER] switch, the screen shows

sub band’s filter width and PBT conditions only.

• Auto (by FILTER,PBT Operation)

: Filter set screen indication can be switched be-

tween main and sub bands filter width and PBT

conditions when either band’s [FILTER] switch

or [TWIN PBT] control is operated. (default)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7800 in the language / languages: English as an attachment in your email.

The manual is 26,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-7800 Manual

Product: