Manual Icom IC-7800 (page 159 of 206) (English)

12376

159

Zoom out

Zoom in

1/206

12-16

SET MODE

Selects the transverter operation condition from Auto

and ON. (default: Auto)

• ON : Turn the transverter operation ON.

• Auto : The transceiver turns into transverter opera-

tion condition when 2 to 13.8 V DC is applied

to [ACC2–A/B] pin 6.

Sets the desired offset frequency for the transverter

operation within 0.000 to 99.999 MHz in 1 kHz steps.

(default: 16.000 MHz)

■ Miscellaneous (Others) set mode (continued)

Selects the RTTY mark frequency. RTTY mark fre-

quency is switched between 1275, 1615 and

2125 Hz. (default: 2125 Hz)

2125 Hz is automatically selected when the internal

RTTY decoder is used.

Selects the RTTY shift width. There are 3 selectable

values: 170, 200 and 425 Hz. (default: 170 Hz)

170 Hz is automatically selected when the internal

RTTY decoder is used.

Selects the RTTY keying polarity. Normal or reverse

keying polarity can be selected.

(default: Normal)

When reverse polarity is selected, Mark and Space

are reversed.

• Normal : Key open/close = Mark/Space

• Reverse : Key open/close = Space/Mark

Selects the desired PSK tone frequency for the PSK

reception from 1000, 1500 and 2000 Hz.

(default: 1500 Hz)

Selects the speech language from English and Japan-

ese. (default: English)

Selects the speech speed from HIGH (faster) and

LOW (slower). (default: HIGH)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7800 in the language / languages: English as an attachment in your email.

The manual is 26,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-7800 Manual

Product: