7
37
INSTALLATION AND CONNECTIONS
■ Opening the transceiver’s case
Follow the case and cover opening procedures shown
here when you want to install an optional unit or adjust
an internal unit, etc.
CAUTION: DISCONNECT the DC power cable
from the IC-78 before performing any work on the
transceiver. Otherwise, there is danger of electric
shock and/or equipment damage.
q Remove the 5 screws from the top of the trans-
ceiver and 4 screws from the sides, then lift up the
top cover.
w Remove the 5 screws from the bottom of the trans-
ceiver, then remove the bottom cover.
■ Optional bracket and carrying handle
D Mounting bracket
An optional IC-MB5
MOBILE MOUNTING BRACKET
is
available to install the radio under a table, on a wall,
in a vehicle, etc.
Select an area to mount the transceiver keeping in
mind that the weight of the transceiver is approx.
3.80kg.
D Carrying handle
An optional handle allows you to easily carry and
transport the transceiver.
Attach the MB-23
CARRYING HANDLE
with the supplied
rubber feet as shown.