670162
96
Zoom out
Zoom in
Previous page
1/180
Next page
Quick split function
When you find a DX station, an important consider-
ation is how to set the split frequency.
When you push and hold the [SPLIT]
switch for 1
sec., the split frequency operation is turned ON, and
the sub readout frequency and operating mode is
equalized to the main readout, then enters standby
for transmit frequency input.
This shortens the time needed to begin split fre-
quency operat
ion.
The quick split function is ON by default. For your
convenience, it can be turned OFF in others set
mode. (p. 129) In this case, the [SPLIT]
switch does
not equalize the main and sub readout frequencies.
q Suppose you are operating at 21.290 MHz (USB)
in VFO mode.
w Push and hold [SPLIT] for 1 sec.
Split frequency operation is turned ON.
[SPLIT] indicator lights.
The sub readout frequency and operating mode is
equalized to the main readout.
The sub readout enters standby for transmit frequency
input and “
” appears.
During FM mode operation, the sub readout frequency
shifts from the main readout frequency according to the
others set mode setting. (p. 129)
The tone encoder function is turned ON in FM mode.
e Rotate the main dial to set the transmit frequency;
or, input the transmit frequency using the keypad
and [F-INP ENT]; or, input a shift frequency using
the keypad and [SPLIT].
” disappears when [F-INP ENT] is pushed.
Offset frequency setting with the keypad and [SPLIT].
[Example]
To transmit on 1 kHz higher frequency:
- Push
[1.8 1] then [SPLIT].
To transmit on 3 kHz lower frequency:
- Push [GENE •], [7 3] then [SPLIT].
D Split lock function
The split lock function is convenient for changing only
the transmit frequency. When the split lock function
is not used, accidentally releasing [XFC] while rotat-
ing the main dial, changes the receive frequency. The
split lock function is OFF by default, but can be turned
ON in others set mode. (p. 129)
q While split frequency operation is ON, push and
hold [SPEECH/LOCK] for 1 sec. to activate the
split lock function.
[LOCK] indicator lights.
w While pushing and holding [XFC], rotate the main
dial to change the transmit frequency.
If you accidentally release [XFC] while rotating the
main dial, the receive frequency does NOT change.
Main dial
[SPLIT] indicator Keypad
SPLIT
Main dial[LOCK] indicator
SPEECH
LOCK
XFC
89
4
RECEIVE AND TRANSMIT
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info