670162
94
Zoom out
Zoom in
Previous page
1/180
Next page
TX function
The TX function shifts the transmit frequency up to
±9.999 kHz in 1 Hz steps (10 Hz steps when cancel-
ling the 1 Hz step readout) without moving the receive
frequency.
q Push [TX] to turn TX function ON.
and the shifting frequency appear when the
function is ON.
w Rotate the [RIT/TX] control.
e To reset the TX frequency, push and hold
[CLEAR] for 1 sec.
Push [CLEAR] momentarily to reset the TX fre-
quency when the quick RIT/TX
clear function is ON.
(p. 132)
r To cancel the TX function, push [TX] again.
” and the shifting frequency disappears.
When RIT and TX are ON at the same time, the
[RIT/TX] control shifts both the transmit and
receive frequencies from the displayed frequency
at the same time.
D TX monitor function
When the TX function is ON, pushing and holding
[XFC] allows you to monitor the operating frequency
directly.
For your convenience— Calculate function
The shift frequency of the TX function can be added/
subtracted to the displayed frequency.
While displaying the TX shift frequency, push
and hold [TX] for 1 sec.
Monitor function
The monitor function allows you to monitor your trans-
mit IF signals in any mode. Use this to check voice
characteristics while adjusting SSB transmit parame-
ter (p. 121).
The CW sidetone functions regardless of the
[MONITOR] switch setting.
q Push [MONITOR] to turn the monitor function
ON and OFF.
The indicator on this switch lights green when the mon-
itor function is ON.
w Push and hold [MONITOR] to monitor set mode.
e Rotate the main dial to adjust the monitor level.
Push and hold [DEF] (F-4) for 1 sec. to select a default
value.
r Push [EXIT/SET] to exit monitor set mode.
NOTE: When using the VOX voice delay, turn the
monitor function OFF; or transmitted audio will be
echoed.
[RIT/TX]
TX
CLEAR
XFC
EXIT/SET
Main dial
F-4
DEF
MONITOR
• Monitor set mode
Appears
87
4
RECEIVE AND TRANSMIT
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info