670162
91
Zoom out
Zoom in
Previous page
1/180
Next page
VOX function
<MODE> SSB/AM/FM
The VOX (Voice-Operated Transmission) function
switches between transmit and receive with your
voice. This function provides “hands-free” operation.
D Using the VOX function
q Select a phone mode (SSB, AM, FM).
w Push [VOX] (MF6) to turn the VOX function ON or
OFF.
“VOX” appears while the VOX is in use.
D Adjusting the VOX function
q Push [SSB] or [AM/FM] to select a phone mode
(SSB, AM, FM).
w Push and hold [VOX] (MF6) for 1 sec. to enter
VOX set mode.
e Select the VOX gain item using [Y] (F-1) or [Z] (F-2).
r While speaking into the microphone, rotate the
main dial to the point where the transceiver is con-
tinuously transmitting.
t If the receive audio from the speaker causes the
VOX circuit to switch to, adjust the anti-VOX set-
ting to the point where speaker audio does not acti-
vate the VOX.
Select the Anti-VOX item using [Y] (F-1) or [Z] (F-2).
Rotate the main dial.
y Adjust the VOX delay for a convenient interval
before returning to receive.
u
Set the VOX voice delay if desired.
i Push [EXIT/SET] to exit VOX set mode.
F-1
F-2
F-4
DEF
EXIT/SET
Main dial
VOX
SSB
AM/FM
• VOX set mode screen
VOX Gain
50%
This item adjusts the VOX gain for the VOX func-
tion. Higher values make the VOX function more
sensitive to your voice.
This setting can be adjusted from 0% to 100% in 1%
steps.
Anti–VOX
50%
This item adjusts the ANTI-VOX gain for the VOX
function. Higher values make the VOX function less
sensitive to receiver output audio from a speaker or
headphones.
This setting can be adjusted from 0% to 100% in 1%
steps.
VOX Delay
0.2s
Set the VOX delay for a convenient interval before
returning to receive within 0.0 to 2.0 sec. range.
VOX Voice Delay OFF
Set the VOX voice delay to prevent clipping of the
first few syllables of a transmission when switching
to transmit.
OFF, Short, Mid and Long settings are available.
When using the VOX voice delay, turn the TX
monitor function OFF to prevent transmitted audio
from be echoed.
84
4
RECEIVE AND TRANSMIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Push and hold for 1 sec. to select a default value.
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info