670162
90
Zoom out
Zoom in
Previous page
1/180
Next page
Notch function
This transceiver has auto and manual notch func-
tions.
The auto notch function uses DSP to automatically
attenuate beat tones, tuning signals, etc., even if they
are moving. The manual notch can be set to attenu-
ate a frequency via the [NOTCH] control.
The auto notch can be used in SSB, AM and FM
mode.
The manual notch can be used in SSB, CW, RTTY,
PSK and AM modes.
Push [NOTCH] to toggle the notch function
between auto, manual and OFF in SSB and AM
modes.
Either auto or manual notch function can be deacti-
vated in others set mode. (p. 132)
Push [NOTCH] to turn the manual notch function
ON and OFF in CW, RTTY, PSK modes.
Push [NOTCH] to turn the auto notch function ON
and OFF in FM mode.
The indicator on this switch lights green when the auto
or manual notch function is ON.
When the manual notch function is ON, push and hold
[NOTCH]
for 1 sec. to select the notch filter width for
manual notch from wide, middle and narrow.
Set to attenuate a frequency for manual notch via the
[NOTCH] control.
” appears when auto notch is in use.
” appears when manual notch is in use.
While tuning the manual notch, noise may be
heard. This comes from the DSP unit and does not
indicate an equipment malfunction.
Auto tune function
<MODE> CW/AM
The automatic tuning function tunes the displayed fre-
quency automatically when an off-frequency signal is
received within the range ±500 Hz (CW) or ±5 kHz (AM).
This function is active while in CW or AM mode is selected.
Push [AUTO TUNE] to toggle the auto tune func-
tion ON or OFF.
blinks when auto tune function is acti-
vated.
After 2 sec. has passed, the auto tune function stops
tuning automatically even it’s still off-frequency.
IMPORTANT!
When receiving a weak signal, or receiving a sig-
nal with interference, the automatic tuning function
may tune the receiver to an undesired signal.
NOTE: The automatic tuning function does not
active on the sub band.
[NOTCH]
control
NOTCH
Auto notch indication
Appears
Manual notch indication
Appears
Unwanted tone frequency
Desired
signal (AF)
Desired
signal (AF)
Particular frequency is attenuated
Auto notch OFF Auto notch ON
AUTO
TUNE
Appears
83
4
RECEIVE AND TRANSMIT
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info