670162
83
Zoom out
Zoom in
Previous page
1/180
Next page
IF filter selection
The transceiver has 3 passband width IF filters for
each mode.
For SSB, CW and PSK modes, the passband width
can be set within 50 to 3600 Hz in 50 or 100 Hz
steps. A total of 41 passband widths are available.
For RTTY mode, the passband width can be set
within 50 to 2700 Hz in 50 or 100 Hz steps. A total of
32 passband widths are available.
For AM mode, the passband width can be set within
200 Hz to 10 kHz in 200 Hz steps. A total of 50 pass-
band w
idths are available.
For FM mode, the passband width is fixed and 3
passband widths are available.
The filter selection is automatically memorized in
each mode.
The PBT shift frequencies are automatically mem-
orized in each filter.
D IF filter selection
q Select the desired mode.
w Push [FILTER] several times to select the IF filter
1, 2 or 3.
The selected passband width and filter number is dis-
played in the LCD.
D Filter passband width setting (except FM
mode)
q
Push and hold [FILTER] for 1 sec. to enter filter set
screen.
w Select any mode except FM.
Passband widths for FM modes are fixed and cannot
be set.
e Push [FILTER] several times to select the desired
IF filter.
r Push [BW] (F-1), then rotate the main dial to adjust
the desired passband width. Then push [BW] (F-1)
to set.
While pushing and holding [BW] (F-1), rotating the
main dial also adjusts the passband width. After adjust-
ment, release [BW] (F-1) to set.
In SSB, CW and PSK modes, the passband width can
be set within the following range.
50 to 500 Hz 50 Hz steps
600 to 3600 Hz 100 Hz steps
In RTTY mode, the passband width can be set within
the following range.
50 to 500 Hz 50 Hz steps
600 to 2700 Hz 100 Hz steps
In AM mode, the passband width can be set within the
following range.
200
Hz to 10 kHz
200 Hz steps
Push and hold [DEF] (F-4) for 1 sec. to select a default
value. (Roofing filter setting also selects a default value.)
t Repeat steps w to r if desired for other modes.
y Push [EXIT/SET] to exit filter set screen.
FILTER
F-1
BW
F-4
DEF
EXIT/SET
Main dial
Selected
IF filter
Passband
width
• During the passband width setting
The PBT shift frequencies are cleared when the
passband width is changed.
This filter set screen graphically displays the
PBT shift frequencies and CW pitch operations.
76
4
RECEIVE AND TRANSMIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Blinks
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info