670162
61
Zoom out
Zoom in
Previous page
1/180
Next page
PSK operation
A high-quality DSP-based PSK encoder/decoder is
built-in to the IC-7600. When connecting a PC key-
board (pgs. 18, 19), PSK operation can be performed
without PSK software installed on your PC.
If desired, you can also use your PSK software; con-
sult the manual that comes with the software.
q Push a band key to select the desired band.
w Push [RTTY/PSK] to select PSK.
After PSK mode is selected, push and hold
[RTTY/PSK] for 1 sec. to toggle between PSK and
PSK-R modes.
“PSK” or “PSK-R” appears.
e
Push
[DECODE] (F-3)
to display the decode
screen.
The IC-7600 has a built-in PSK decoder.
r Tune to the desired signal with the main dial.
The signal is properly tuned when the radiated lines
in the vector tuning indicator narrow, as show in the
example below.
The radiated lines in the vector tuning indicator may be
displayed sporadically.
When a PSK signal is received, the water-fall display is
activated.
The water-fall display shows the signals within the pass-
band. Received PSK signals appear as vertical lines.
t Press [F12] of the connected keyboard to transmit.
[TX] indicator lights red.
y Type from the connected keyboard to enter the
message that you want to transmit.
The typewritten contents are indicated in the TX buffer
screen and transmitted immediately.
The text color will be changed when transmitted.
Press one of
[F1][F8]
to transmit the TX memory con-
tents.
u Press [F12] of the keyboard to return to receive.
For your convenience
The transmission contents can be typed before being
transmitted.
q Perform the steps q to r above.
w Type from the connected keyboard to enter the
message that you want to transmit.
The message is shown in the TX buffer screen.
e Press [F12] of the connected keyboard to transmit
the message.
The color of displayed text, in the TX buffer screen, will
be changed when transmitted.
To cancel the transmission, press [F12] tw
ice.
r Press [F12] of the keyboard to return to receive.
Main dial
EXIT/SET
F-3
[TX]
indicator
[RX]
indicator
Band keys
RTTY/PSK
DECODE
Appears
1500
1195 1805
Vector tuning indicator
FFT scope
TX buffer screen
RX contents screen
Water-fall
Vector tuning indicator indication example
Tuned BPSK signal
BPSK/QPSK idle signal Unmodulated signal
Tuned QPSK signal
54
4
RECEIVE AND TRANSMIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info