670162
16
Zoom out
Zoom in
Previous page
1/180
Next page
$6 MEMORY UP/DOWN SWITCHES []/[] (p. 99)
Push to select the desired memory channel.
Memory channels can be selected both in VFO and
memory modes.
Push to select the desired memory channel di-
rectly after pushing [F-INP ENT] and a memory
channel number.
$7 MEMOR
Y WRITE SWITCH [MW] (p. 101)
Stores the selected readout frequency and operat-
ing mode into the displayed memory channel when
pushed and held for 1 sec.
This function is available both in VFO and memory
modes.
$8 MEMO PAD-WRITE SWITCH [MP-W] (p. 104)
Programs the displayed readout frequency and op-
er
ating mode into a memo pad.
The 5 most recent entries remain in memo pads.
The memo pad capacity can be expanded from 5 to 10
in others set mode. (p. 132)
$9 MEMO PAD-READ SWITCH [MP-R] (p. 104)
Each push calls up a frequency and operating
mode in a memo pad. The 5 (or 10) most recently
programmed frequencies and operating modes
can be recalled, starting from the most recent.
The memo pad capacity can be expanded from 5 to 10
in others set mode. (p. 132)
%0 VFO/MEMORY SWITCH [VFO/MEMO]
Switches the selected readout operating mode
between the VFO and memory when pushed.
(pgs. 26, 99)
Transfers the memory contents to VFO when
pushed and held for 1 sec. (p. 102)
%1 Q
UICK TUNING SWITCH [TS]
Turns the quick tuning step ON and OFF. (p. 29)
While the quick tuning indicator, Z,is displayed
above the frequency indication, the frequency can
be changed in programmed kHz steps.
0.1, 1, 5, 9, 10, 12.5, 20 and 25 kHz steps are avail
-
ab
le for each operating mode independently.
When the quick tuning step is ON, push and hold
for 1 sec. to enter quick tuning step set mode.
(p. 29)
When the quick tuning step is OFF, push and
hold for 1 sec. to turn the 1 Hz tuning step ON
and OFF. (p. 30)
%2
AUDIO PEAK FILTER/TWIN PEAK FILTER
SWITCH [APF/TPF]
During CW mode operation (p. 39)
Push to turn the audio peak filter ON and OFF.
• “ appears when audio peak filter is in use.
When the audio peak filter is ON, push and hold
for 1 sec. to select the APF passband width
from WIDE, MID and NAR or from 320, 160 and
80 Hz depending on APF type setting (SOFT or
SHARP).
During RTTY mode operation (p. 47)
Push to tur
n the twin peak filter ON and OFF.
• “ appears when twin peak filter is in use.
The indicator on this switch lights green when the
function is activated.
Front panel (continued)
TWIN
-
PBT
RIT/ TX
Ӡ
NOTCH
CW PITCH
VOICE MEMORY
BAL NR
AF RF/SQL
MIC GAIN RF POWER BK
-
IN DELAY KEY SPEED
TIMER
PHONES
ELEC
-
KEY
MIC
AUTO
TUNE
GENE F
-
INP
1.8 3.5
1 2
14
5
18
6
7
3
24
8
28
9
50
0
ENT
4
7
10
21
CHANGE
TS
XFC
SPLIT
DUAL
WATCH
MAIN
/
SUB
M.SCOPE
VFO/MEMO
MP
-
W
MW
MP
-
R
F
-
6
F
-
5
F
-
4
F
-
3
F
-
2
F
-
1
NRNB
PBT
-
CLR
APF/TPF
NOTCH
POWER
RIT
CLEAR
TX
Ӡ
SPEECH
LOCK
FILTER
REC PLAY
EXIT
/
SET
SSB CW
RTTY
/
PSK
AM/FM
MONITOR
TRANSMIT
TUNER
HF/50MHz TRANSCEIVER
LOCKTX RX SPLIT
$6
%2
$7 $8 $9 %0%1
%3
%4
%5
9
1
PANEL DESCRIPTION
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7600 in the language / languages: English as an attachment in your email.

The manual is 14,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info