13. SPLIT LOCK
When this item is ON, the tuning dial can be used to
adjust the transmit frequency while pushing [XFC]
even while the lock function is activated. See p. 47 for
split frequency operation details.
14. DUP Offset HF
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function
when operating on an HF band in FM mode only.This
is used to input the repeater offset for an HF band.
The offset frequency can be set from –4 MHz to +4
MHz in 1 kHz steps.
15. DUP Offset 50M
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function
when operating on the 50 MHz band in FM mode
only. This is used to input the repeater offset for the
50 MHz band. The offset frequency can be set from
–4 MHz to +4 MHz in 1 kHz steps.
16. DUP Offset 144M
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function
when operating on the 144 MHz band in FM mode
only. This is used to input the repeater offset for the
144 MHz band. The offset frequency can be set from
–4 MHz to +4 MHz in 1 kHz steps.
17. One Touch Rptr
This item turns the one touch repeater function ON
(+duplex or –duplex) and OFF. See p. 34 for details
concerning the one touch repeater function.
18. Auto RePeater (USA only)
This item sets the auto repeater function to ON-1
(auto duplex setting), ON-2 (auto duplex setting and
activating tone encoder) or OFF. See p. 35 for details
concerning the auto repeater function.
19. Auto Tune
The internal antenna tuner has an automatic start ca-
pability which starts tuning if the SWR is higher than
1.5–3 in the HF bands.
When “OFF” is selected, the tuner remains OFF even
when the SWR is poor (1.5–3). When “ON” is se-
lected, automatic tune starts even when the tuner is
turned OFF.
