Manual Icom IC-7300 (page 129 of 173) (English)

670163

129

Zoom out

Zoom in

1/173

OTHER FUNCTIONS

13-3

Measuring SWR (Continue)

D Plot measurement

You can measure the SWR over the entire set

frequency range.

1. Set the desired frequency band.

2. Select the RTTY or RTTY-R mode.

3. If necessary, adjust the RF power to

approximately 30 W in the Multi-function menu.

• 70 MHz: 20 W

( 70 MHz band transmission may be possible,

depending on the transceiver version.)

NOTE: Before transmitting, monitor the operating

frequency to make sure you will not cause

interference to other stations on the same

frequency.

4. Open the SWR GRAPH screen.

» SWR

5. Set the center frequency for the SWR to be

measured. (Example: 14.080.00)

6. If necessary, touch [STEP] several times until

the measuring step is selected, or touch [BAR]

several times until the number of graph bars is

selected.

L You can select between 10, 50, 100, and

500 kHz measuring steps.

L You can select between 3, 5, 7, 9, 11 and

13 graph bars.

7. Touch

to start measuring.

• Thefrequencymarker“▲”andthemeasurement

frequency are displayed.

Measuring step

Number of

graph bars

Center frequency

8. Push

TRANSMIT

or hold down [PTT] on the

microphone to transmit.

• The bar graph displays the SWR.

Frequency marker

Measurement

frequency

Measuring SWR

The best match

is within this

range.

(1.5 or less)

9. Push

TRANSMIT

or release [PTT] to stop transmitting.

10. Repeat steps 8 and 9 to measure the SWR over

the entire frequency range.

Selecting the display type and font

You can select between 2 display backgrounds and

2 frequency readout fonts.

D Selecting the display background

1. Selectthe“DisplayType”screen.

» SET > Display > Display Type

2. Select the desired background between A and B

by rotating and then pushing

MULTI

• A: Black background (default)

• B: Blue background

3. To close the DISPLAY screen, push

EXIT

several

times.

D Selecting the display font

1. Selectthe“DisplayFont”screen.

» SET > Display > Display Font

2. Setthedesireddisplayfontto“Basic”or“Round”

by rotating, and then pushing

MULTI

• Basic (Default):

• Round:

3. To close the DISPLAY screen, push

EXIT

several

times.

is there available a wiring pictorial chart for the small internal ic-7300 coaxial jumper cables?
ie: from the RF unit to the PA board? tnx Sam in Alabam KF4TXQ Submitted on 2-1-2022 at 06:09
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7300 in the language / languages: English as an attachment in your email.

The manual is 24,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-7300 Manual

Product: