670164
87
Zoom out
Zoom in
Previous page
1/104
Next page
Mode Select (AM)
This item inhibits the selection of AM mode, and allows
you to simplify operation.
on : AM modes are selectable.
oF : AM modes are inhibited.
ON (default)
CI-V Baud Rate
Sets the CI-V data transfer rate. 300, 1200, 4800, 9600,
19200 bps and Auto are available.
When Auto is selected, the baud rate is automatically set
according to the connected controller or remote controller.
Auto (default)
CI-V Address
To distinguish equipment, each CI-V transceiver has its
own Icom standard address in hexadecimal code.
The IC-7200’s address is 76h.
When 2 or more IC-7200s are connected to an optional
CT-17 CI-V LEVEL CONVERTER, rotate [DIAL] to select
a different address for each IC-7200 in the range 01h to
7Fh.
76 : Address of 76h
76h (default)
CI-V Transceive
Transceive operation is possible with the IC-7200 con-
nected to other Icom HF transceivers or receivers.
When “ON” is selected, changing the frequency, operat-
ing mode, etc. on the IC-7200 automatically changes
those of connected transceivers (or receivers) and vice
versa.
on : Transceive ON
oF : Transceive OFF
ON (default)
Reference Frequency Adjustment
Adjusts the internal reference signal frequency within 0%
to 100% range in 1% steps during frequency calibration.
NOTE: Default setting is different for each transceiver.
D Paddle operation from [MIC] connector
Connect a CW paddle as at right to operate an elec-
tronic keyer from the [MIC] connector.
Be sure to select “Paddle Polarity,“Keyer Type” and
“Mic Up/Down Keyer” in the set mode. (pgs. 80, 81)
• Connect straight key to “DOT” side.
Push both of DOTand DASHto activate the
squeeze operation.
MIC connector
CW
paddle
DOT
DASH
3.9 kø ±5%
2.2 kø ±5%
MIC U/D e
GND y
82
10
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7200 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info