670164
81
Zoom out
Zoom in
Previous page
1/104
Next page
76
10
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Quick Split
This item turns the quick split function ON or OFF.
When this item is set to ON, push and hold
SPLIT
for
1 sec. to set the undisplayed VFO frequency and oper-
ating mode are set the same as the displayed VFO fre-
quency and operating mode.
See pgs. 58, 59 for details.
on : The quick split function ON
oF : The quick split function OFF
ON (default)
Split Lock
This item turns the split lock function ON or OFF.
When this item is set to ON, the transmit frequency can
be adjusted by rotating [DIAL] while pushing and holding
RIT
* even if the lock function is activated.
* The transmit frequency check function (“XFC”; as below) must
be turned ON in advance.
See p. 59 for split frequency operation details.
NOTE: When the split lock function is ON, the transmit
frequency cannot be adjusted by rotating [DIAL] while
pushing and holding [PTT] even if the lock function is
not activated.
on : The split lock function ON
oF : The split lock function OFF
OFF (default)
XFC
This item turns the XFC (transmit frequency check) func-
tion ON or OFF.
on : The transmit frequency can be monitored while
pushing and holding
RIT
oF : The transmit frequency check function OFF
NOTE: When the XFC function is turned ON, the RIT
calculation function (p. 44) is not available.
OFF (default)
Auto Tune
The optional AT-180 antenna tuner has an automatic
start capability which starts tuning if the SWR is higher
than 1.5:1.
on : The automatic tune starts even when the tuner is
turned OFF during HF bands operation.
oF
: The tuner remains OFF even when the SWR is poor
(1.5:1)
OFF (default)
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7200 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info