670164
14
Zoom out
Zoom in
Previous page
1/104
Next page
9
q USB JACK [ ]
Connects an USB cable to be used for the modula-
tion input (p. 20), the transceiver operation with PC
and the received audio import to the PC.
CAUTION:
For Windows® XP/2000:
NEVER install the driver before connecting an
USB cable between the transceiver and PC.
For Windows Vista™:
NEVER connect an USB cable until the driver
installation has been complete.
About the USB driver:
Icom HP (http://www.icom.co.jp/world/support/
index.html) gives the USB driver and the installa-
tion guide download service.
The f
ollowing items are required:
PC
Microsoft
®
Windows
®
XP/2000 or
Microsoft
®
Windows Vista™ installed
With USB port
Other items
• USB cable (third party’s)
• PC software
About the modulation input:
Select “U” (USB) in the set mode item ‘Modulation
input (Data OFF)’ or ‘Modulation input (Data ON)’.
And the modulation input level from USB jack can
be set in the set mode item ‘USB Level. (p. 77)
w
EXTERNAL SPEAKER JACK [EXT SP]
(pgs. 14, 93)
Connects a 4–8 ø external speaker, if desired.
When an external speaker is connected, the internal
speaker does not function.
e CI-V REMOTE CONTROL JACK [REMOTE]
(pgs. 14, 88)
Designed for use with a PC for remote control of
the transceiver functions.
Used for transceiver operation with another
Icom CI-V transceiver or receiver.
r ANTENNA CONNECT
OR [ANT] (p. 13)
Accepts a 50 antenna with a PL-259 connector
and a 50 coaxial cable.
t ALC INPUT JACK [ALC] (p. 17)
Connects to the ALC output jack of a non-Icom lin-
ear amplifier.
y SEND CONTROL JACK [SEND] (p. 17)
Goes to ground while transmitting to control exter-
nal equipment such as a linear amplifier.
• Max. control level: 16 V DC/0.5 A
u ELECTRONIC KEYER JACK [KEY]
Accepts a key or paddle connector for the internal
electronic keyer.
The keyer type selection between the internal elec-
tronic keyer and straight key operation can be made in
set mode.
When connecting
a straight key
When connecting
a paddle
(dot)
(com)
(dash)
()
If you use an external electronic keyer, make
sure the output voltage of the keyer is less than
0.4 V when keying the transmitter.
DC 13.8V ACC
KEY SEND ALC ANT
REMOTE EXT SP
GNDTUNER
o !0 !1 q
w
e
r
tyui
Rear panel
1
PANEL DESCRIPTION
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7200 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info