670164
9
Zoom out
Zoom in
Previous page
1/104
Next page
4
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
!5 SPCH•LOCK KEY
SPCH
Push to announce the selected frequency and
S-meter level by the speech synthesizer. (p. 32)
The parameters to be announced can be selected in
the set mode. (pgs. 77, 78)
Push and hold for 1 sec. to turn the dial lock
function ON or OFF. (p. 29)
The dial lock function electronically locks the main
dial.
• “
appears while the dial lock function is ON.
!6 POWER KEY
Push to turn power ON.
Turn the DC power supply ON in advance.
Push and hold for 1 sec. to turn power OFF.
!7 TUNER KEY
TUNER
(p. 67)
Push to turn the automatic antenna tuner func-
tion ON or OFF.
• An optional antenna tuner must be connected.
appears on the display when the automatic
antenna tuner function is turned ON.
Push and hold for 1 sec. to manually tune the
antenna tuner.
• An optional antenna tuner must be connected.
When the tuner cannot tune the antenna, the tuning
circuit is bypassed automatically after 20 sec.
!8 RF GAIN/SQUELCH CONTROL [RF/SQL]
(outer control; p. 30)
Adjusts the RF gain and squelch threshold level.
The squelch removes noise output from the
speaker (closed condition) when no signal is re-
ceived.
The squelch is available for all modes.
The control can be set as the squelch plus RF gain
controls, squelch control only (RF gain is fixed at
maximum) or Auto (RF gain control in SSB, CW and
RTTY; squelch control in AM) in set mode.
MODE
SET MODE SETTING
AUTO SQL RF + SQL
SSB, CW
RTTY
RF GAIN SQL RF GAIN + SQL
AM SQL SQL RF GAIN + SQL
Minimum RF gain
Adjustable range
RF gain adjustable
range
Maximum RF gain
Maximum RF gain
Squelch is open.
S-meter squelch
S-meter squelch
threshold
Lowest threshold Highest threshold
Squelch is open.
S-meter squelch
S-meter squelch
threshold
When functioning as RF GAIN/SQL control
When functioning as RF GAIN control
(Squelch is fixed open; SSB, CW, RTTY only)
When functioning as SQL control
(RF gain is fixed at maximum.)
!9 AF CONTROL [AF] (inner control; p. 29)
Varies the audio output level from the speaker.
Audio output
decreases
Audio output
increases
@0 HEADPHONE JACK [PHONES]
Accepts headphones with 8–16
impedance.
• Output power: 5 mW with an 8 load.
When headphones are connected, no receive audio
comes from the speaker.
@1 MICROPHONE CONNECTOR [MIC]
Accepts supplied or optional microphone.
See p. 11 for appropriate microphones and microphone
connector information.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7200 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info