670168

Icom IC-7100 Manual

90
Zoom out
Zoom in
Previous page
1/96
Next page
6
SET MODE
6-8
Connectors In this item, set the external connector’s options.
USBAudioSQL OFF (OPEN) or ON Selects whether or not to output the audio from
the [USB] connector, according to the squelch
state (open or closed).
ACC/USB Output Select AF or IF Sets the [USB] connector and the [ACC] socket
usage to received audio output or the IF output
for DRM (Digital Radio Mondiale).
ACC/USB AF Level 0%~50 %~100% Sets the audio output level at the [ACC] socket
and the [USB] connector.
ACC/USB IF Level 0%~50 %~100% Sets the IF output level at the [ACC] socket and
the [USB] connector.
ACC MOD Level 0%~50 %~100% Sets the input modulation level at the [ACC]
socket.
DATA MOD Level 0%~50 %~100% Sets the input modulation level at the [DATA]
jack.
USB MOD Level 0%~50 %~100% Sets the input modulation level at the [USB] con-
nector.
DATA OFF MOD MIC, ACC, MIC,ACC or USB Selects the connector(s) for the desired modula-
tion to input when the data mode is not used.
DATA MOD MIC, ACC, MIC,ACC or USB Selects the connector(s) for the desired modula-
tion to input when the data mode is used.
External Keypad
VOICE OFF or ON Selects whether or not to transmit voice memory
contents using the external keypad.
KEYER OFF or ON Selects whether or not to transmit keyer memory
contents using the external keypad.
RTTY OFF or ON Selects whether or not to transmit RTTY memory
contents using the external keypad.
CI-V
CI-V Baud Rate 300, 1200, 4800, 9600, 19200 or Auto Sets the CI-V code transfer speed.
CI-V Address 01h~88h~DFh Sets the transceiver's unique CI-V hexadecimal
address code.
CI-V Transceive OFF or ON Turns the CI-V Transceive function ON or OFF.
USB2/DATA1 Function
USB2 Function OFF, RTTY Decode or DV Data Selects the use of the COM port (USB2).
DATA1 Function OFF, RTTY Decode, DV Data or GPS Select the use of the [DATA1] jack.
GPS Out
OFF or DATA1 g USB2
Selects whether or not to output the data to the
COM port (USB2) when data is input from a GPS
receiver through the [DATA1] jack.
DV Data/GPS Out Baud 4800 or 9600 Sets the DV or GPS data transfer speed
RTTY Decode Baud 300, 1200, 4800, 9600 or 19200 Sets the RTTY decode monitor speed.
VSEND Select OFF, UHF or VHF/UHF Selects the band to use for the [ACC] socket’s pin
7 (VSEND usage).
9600bps Mode OFF or ON Selects whether or not to allow data transmission
at 9600 bps.
Set mode items and Default settings (Continued)
NOTE: The default settings shown below in bold are for the USA version.
The default settings may differ, depending on your transceiver version.
… 90 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7100 in the language / languages: English as an attachment in your email.

The manual is 25,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info