12056
84
Zoom out
Zoom in
Previous page
1/88
Next page
80
17
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION REF.
No power comes on. Power connector has a poor contact.
Polarity of the power connection is reversed.
Blown fuse.
Check the connector pins.
Reconnect the power cable observing the
proper polarity. Replace the fuse, if damaged.
Check the cause, then replace the fuse.
pgs.
15, 74
p. 74
No sound comes from the
speaker.
Volume level is too low.
The squelch level is set too tight.
A selective call or squelch function is activated
such as tone squelch or pocket beep.
Rotate [VOL] clockwise.
Open the squelch.
Turn the appropriate function OFF.
p. 23
p. 23
pgs.
50, 52
Sub band signals are not
audible.
The sub band mute function is activated. Turn the function OFF. p. 65
No contact possible with an-
other station.
The transceiver is set to semi-duplex.
The other station is using tone squelch.
Set to simplex.
Turn OFF tone squelch.
p. 26
p. 50
Repeater cannot be ac-
cessed.
Wrong offset frequency is programmed.
Wrong subaudible tone frequency is programmed.
Correct the offset frequency.
Correct the subaudible tone frequency.
p. 30
p. 29
Frequency cannot be set. The frequency lock function is activated.
Priority watch is paused on the watching fre-
quency.
Turn the function OFF.
Push [(PRO)PRIO] or [(MEM)PRIO] to resume
the watch.
p. 19
p. 48
Scan does not operate. Squelch is open.
The selected programmed scan edge memory
channels (e.g. 1A/1B) have the same frequencies.
Only 1 memory channel is programmed or other
channels are set as skip channels.
Set the squelch to the threshold point.
Reset the scan edges.
Program other memory channels or cancel the
memory skip function in the desired channels.
p. 23
p. 44
pgs.
50, 52
Transmission is automati-
cally cut off.
Time-out timer is activated. Set the timer to OFF. p. 63
Transmission continues
even when PTT is released.
One-touch PTT function is activated. Turn the function OFF. p. 25
If your transceiver seems to be malfunctioning, please check
the following points before sending it to a service center.
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-2800H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2800H in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info