Manual Icom IC-2800H (page 83 of 88) (English)

12056

Zoom out

Zoom in

1/88

■ Common settings

There are 3 setting menus available.

Common : Commonly set items such as operation

beeps, sub band mute, sub band beep, RF

attenuator, name display, TOT, auto repeater,

auto power-off, cooling fan setting, packet

data speed, squelch delay, VHF/UHF scan

resume timer and RF output power settings.

Display : Sets LCD contrast and brightness.

Select display type. Enter ‘Opening Title’ and

clone ‘Comment.’

MIC Option : Switches on the transceiver’s front panel can

be assigned to the microphone’s [F-1]/[F-2]

for the HM-98 and [UP]/[DN] for the HM-97

and HM-118/T/TA.

■ Exiting cloning mode

➥After cloning is ﬁnished, push the [UP]/[DN] or [Y]/[Z] on

the microphone to exit the cloning mode and to return to

normal operating condition.

•The [POWER] switch does not function in the cloning mode.

DO NOT disconnect the controller cable while in the

cloning mode. The transceiver remains in the cloning

mode and continues in power ON condition.

CS-2800 CLONING SOFTWARE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2800H in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-2800H Manual

Product: