12302
46
Zoom out
Zoom in
Previous page
1/96
Next page
29
MEMORY OPERATION
New2001
5
General description
The transceiver has 212 memory channels including 10 scan
edge memory channels (5 pairs), and 2 call channels. Each of
these channels can be individually programmed with operating
frequency (pgs. 1113), duplex direction (p. 23) and offset
(p. 27), subaudible tone encoder or tone squelch and its tone
frequency (pgs. 23, 25, 52, 53) and skip information* (p. 44).
In addition, a total of 10 memory banks, A to J, are available
for usage by group, etc.
*except for scan edge memory channels.
Memory channel selection
D Using the tuning dial
q Push the desired bands
[M/CALL(MW)] several
times to select memory
mode.
•“M indicator appears
w
Rotate the same bands
[DIAL] to select the de-
sired memory channel.
Programmed memory
channels only can be se-
lected.
D Using the [Y]/[Z] keys
z Push [BAND] to select the desired band as
the main band.
x Push [MR/CALL] to select memory mode.
c Push [Y] or [Z] to select and set the desired
memory channel.
Pushing [Y]/[Z] for 1 sec. activates a scan.
If scan is activated, push [Y]/[Z] again or push
[
CLR
A(MW)] to stop it.
D Using the keypad
z Push [BAND] to select the desired band as
the main band.
x Push [MR/CALL] to select memory mode.
c Push [
ENT
C(T-OFF)] to activate the keypad
for numeral input.
v Push 3 appropriate digit keys to input a chan-
nel number.
Blank channel can be selected.
Push only 1 appropriate digit key, [
MONI
1(BANK)],
[
SCAN
2(T-SCAN)], [
PRIO
3(PTT-M)],
[
HIGH
4(DTCS)] or [
MID
5(DTCSS)] then push
[
MM
(TONE-1)] or [
SQL
Z #(16KEY-L)] to select scan
edge channels.
MM
and # can be used for A
and b respectively.
MR/CALL
Y/Z
MR/CALL
Y/Z
MAIN
T X
M
Push [M/CALLMW] to select
memory mode.
! appears
IC-2720H_1.qxd 02.12.18 13:02 Page 29 (1,1)
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-2720H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-2720H in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info